Jump to content
SAU Community

Recommended Posts

mine landed in brisbane on 20th of Jan (from memory) so it took just over 3 weeks to get it cleared, delivered to sydney, complied, registered.

The car my wheels came in took exactly the same period of time: in fact I think it was probably on the same truck from Queensland as yours. I assume its probably correct to say that Brisbane was overwhelmed.

LW.

  • Replies 580
  • Created
  • Last Reply

Top Posters In This Topic

i think it's safe to say that seaway needed to have pulled their fingers out. but no matter now, I have the car and all the delays are a thing of the past...

For those guys who recently registered their imports in NSW, how did you go about it, did you :

1) pick up the car from the complience shop and drive it to the RTA to get it registered(do i need an unregistered vehicle permit?)

or

2) Collect paperwork from complience shop, then go to rta have car registered then back to complience shop with plates and rego sticker.

Just trying to work out the best way to do it

For those guys who recently registered their imports in NSW, how did you go about it, did you :

1) pick up the car from the complience shop and drive it to the RTA to get it registered(do i need an unregistered vehicle permit?)

or

2) Collect paperwork from complience shop, then go to rta have car registered then back to complience shop with plates and rego sticker.  

Just trying to work out the best way to do it

Its an over the counter transaction, however you may need to take the car to an RTA inspection centre so it can go "over the pits" (which is essentially just a plate check): if its a 15 year car its unlikely, but if its a SEVS car you may need too.

LW.

Well, so far the people we have provided contact details for (Jim Lloyd et al) have not been very responsive. They want to push through the changes without listening to all those who will be affected. Jim Lloyd's Office staff claim he is "out" whenever you phone, and they are deleting all e-mail complaints relating to this issue WITHOUT EVEN READING THEM, see below:

Subject: Not read: 15 yr Rule Your message

To: [email protected]

Subject:

was deleted without being read on 17/02/2005 7:28 AM.

Not altogether surprising since it is clear that Jim does not care what the great majority of Australians think, instead he is more concerned about protecting the profits of the large car manufacturers who lobby the Govt. intensely for no apparent reason other than to maintain their unfair monopoly of the marketplace.

2004 saw a record number of new car sales of nearly 1 MILLION CARS. According to DOTARS, "grey" imports at their peak under the old import scheme reached about 17,000 cars per year. The introduction of SEVS dropped import numbers to virtually zero for many months, and the number now coming in even given the 15 year rule is certainly substantially less than the peak a few years ago. So import numbers would be less than about 0.5% compared to new car sales. Note that in 2004 Holden sold 79,170 Commodores alone. Ford Falcon, 65,384. Nissan Pulsar, 19,531. Even Toyota sold 17,879 of their Echos in 2004 !

Remember of course that those enthusiasts importing secondhand vehicles under the 15 year rule are never in the market for a new car anyway ! And what's more, imports are nearly always more efficient and have higher safety and emissions standards than the local options IN THE SAME PRICE RANGE and / or of the same year.

We have been advised that the following people will be much more receptive to your thoughts on this matter than our poor friend Jim who doesn't want to listen to the people that voted him in. If sufficient public response gets to the right Politicians, the issue may be raised to their awareness and this will at least give Jim some difficult questions to answer in Parliament if not postpone the changes. At this point, most of the people that matter still seem unaware of the issue. We are seeking to change that, with your help, and to make this issue a political hot potato. But there is not much time left so if you feel strongly about this issue then please make your thoughts known to the following, in particular to Kim Beazley. Don't forget to point out how many small businesses will be affected by these changes and how many people will be put out of work.

Kim Beazley - Member for Brand

Federal Labor Leader

Parliament House:

Tel: (02) 6277 4022

Fax: (02) 6277 8495

Email: [email protected]

Brand Electorate Office:

1/18 Council Avenue

Rockingham, WA, 6168

Toll Free: 1800 016 023

Tel: (08) 9527 9377

Fax: (08) 9592 1361

http://www.alp.org.au/people/wa/beazley_kim.php

Tony Burke - Member for Watson

Shadow Minister for Small Business

Parliament House:

House of Representatives

Parliament House

Canberra ACT 2600

Tel: (02) 6277 4548

Fax: (02) 6277 8417

Electorate Office:

Suite 204

1-5 Commercial Road

Kingsgrove NSW 2208

Tel: (02) 9554 3808

Fax: (02) 9554 3504

Email: [email protected]

Postal Address:

PO Box 324

Kingsgrove NSW 1480

http://www.alp.org.au/people/nsw/burke_tony.php

Kerry O'Brien - Senator for Tasmania

Shadow Minister for Regional Services, Local Government and Territories

(Jim Lloyd's opposite number)

Parliament House:

Tel: (02) 6277 3842

Fax: (02) 6277 3780

Email: [email protected]

Electorate Office:

44 Charles Street

Launceston, TAS, 7250

Tel: (03) 6334 9366

Fax: (03) 6334 9369

Postal Address:

PO Box 1193

Launceston, TAS, 7250

_______________________________________________________________________________

[/size]

To remove an e-mail address from this mailing list please follow the simple instructions provided on any mailing list update. To add an e-mail address please use the link on our website.

We only wish to send this information to those willing to receive it. We do not condone spamming or the sending of unwanted e-mail. Our apologies in advance if this e-mail is unwanted.

Regards

Geoff Risbey

Manager

Prestige Motorsport

0418 944 253

www.prestigemotorsport.com.au

At your service Mon to Fri from 9am to 5pm WST, and Sat from 9am to 3pm WST

http://http://www.skylinesaustralia.com/forums/member.php?u=12870' target='_blank'>

My importation update.

Just spoke with Mark Hocking over in Japan, a great guy. I just recently got an email from him regarding the fact he couldn’t start my car last week when they were trying to get it down to customs and clearance at the docks. So mark took it back to Prime garage where it was built just over 1.5 years ago, they eliminated the spark plugs/coil/leads and some other stuff, but pointed it down to the GTR High Flow Fuel Pump. eeek hehe, So they will be putting in another one tomorrow, 40,000 yen more.

But then the good news came, My car will be on the next vessel leaving Japan next Tuesday, coming to Fremantle, which should arrive 11th of march according to the Fremantle ports docking schedule on there website.

my car didn't make it on the kiwi boat that left on the 19th or so. Been told the next kiwi boat isn't leaving till the 12th so its either waiting longer or possibly trying to get it on a boat with a different carrier. I tihnk this is mainly due to the kiwi boat thats still out of service. Whats everyone elses status with boats at the momment? i been waiting for a boat for a month or so now.

skypy12: Well my car was booked around the 29th of November last year and was elligble for immediate import leaving Yokohoma. Its missed 3 kiwi boats now.. and I know my car has been in the kiwi holding yard since January. The next boat arrives here on the 10th of March.

It depends on what boat and what port. My friend bought his 300zx about 4 weeks ago and it got straight onto a boat, straight through compliance and we registered it a couple of days ago. While i've been waiting since November and my car is still not on a Boat.

See Sig..

I have mised three boats into freo from Kawasaki. Theres only one per month and spoke to the supply yesterday and he couldnt let me know for certain if it would get on the next boat. After waiting months for my vehicle to turn 15 it's turned into a very long process.

pentae, I would be so annoyed. I was talking to someone else who had been waiting since November too for a car to come to Fremantle port. And here I am with my car, which I bought 26 days ago, already on boat which left Kanda on Tuesday, and will be in Fremantle on the 11th of March. I think it comes down to your supplier in Japan, have you tried ringing him and applying pressure or get your broker too? Unfortunately we are small one time buyers, they already have there money. Not like they will get anything extra out of us. The guy I mention previously tried calling up his supplier but didn’t get far.

But hey you are one patient guy, your wait would have just killed me, but once your car hits the water, you’re going to really appreciate it :D Be the best feeling you had in a long long time second to sex, and if not in your case better.

:)

Well

I just checked out my my R32gtst Type M. Some F#$%wit has keyed the paint work down both sides. Actually its more like a screw driver mark.

At this point in time I would like to thank all the low life wharfies involved in taking good care of my car from Japan.

I going to have a little cry now :boohoo:

Well

I just checked out my my R32gtst Type M. Some F#$%wit has keyed the paint work down both sides. Actually its more like a screw driver mark.

At this point in time I would like to thank all the low life wharfies involved in taking good care of my car from Japan.

I going to have a little cry now :boohoo:

Your in Queensland, so I assume it came via Kiwi, in which case you can probably attempt an insurance claim under KIPS (http://www.kiwicar.com/kips.htm):

SPECIALIST COVER FOR YOUR VEHICLES

KIPS will provide automatic insurance for your vehicles (note that inner cargo is excluded from cover - as are vehicles that are deemed to have already sustained accident damage, or are not driveable), from the time of purchase in Japan until delivery onto your premises or other commercial premises by transporter (first place of rest after transporting from port discharge area). Please also note the following:

Marine Insurance cover terminates in the following circumstances (Whichever occurs first):

  1.      30 days after discharge from the vessel

  2.      Delivery to the importers premises, or premises described in the Bill of Lading

  3.      Delivery to other commercial premises instructed by the insured

  4.      When the vehicle is driven under its own power - except when incidental to the loading & unloading.  

Delivery into Bonded store that is incidental to the transit of the vehicle shall continue to be covered by KIPS, provided the total period from the date of discharge from the vessel does not exceed 30 days. If the vehicle has not left the port or bonded store after 30 days from the date of discharge from the vessel, cover will automatically cease and become the responsibility of the importer to insure.

KIPS WILL PROTECT YOUR VEHICLES FROM THE FOLLOWING RISKS - AND MORE

Fire - pilfering - stranding - general average - mishandling - theft - earthquake - sinking - collision (whilst driven incidental to loading and unloading).

The trick is going to be showing some evidence the car was not damaged before it was delivered to Kiwi's holding yard in Japan.

LW.

can anyone tell me if the cars getting shipped in containers are making it out of japan faster than the roro cars... maybe the container ones will get out faster... mine is comming in a container so im hoping this may be the case...

Anyone know when the next Kiwi ship will be arriving in Brisvegas? According to schedule all i see is dashes.

Oh and madmurf I think I would be crying also. Go the KIPS and see if you can get a full respray. Dirty #$%@ers.

According to my importer (JDMBOYZ) there is a kiwi vessel which left Japan a few weeks back on its way to QLD now? Should of arrived in QLD on the 24th of feb, but may of been delayed a few days?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
    • Ceste, jak se mas Marek...sorry I only have english keyboard. Are you a fan of Poland's greatest band ever?   
×
×
  • Create New...