Jump to content
SAU Community

Recommended Posts

I realise this is the wrong forum and may get me cained but mechanically speaking, what are 300ZXs like? I know they go fast and I know they're a dime a dozen but I found on that looks clean us, mechanically sound with a full service history, etc. It looks immaculate and like everything I could want in a car. Just wanted to ask all the Nissan heads here and see what the general concensus is on these cars as a whole.

I realise everyone will be biased towards the Skyline but this car I've found is a damn good buy.

Thanks,

- J.

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/
Share on other sites

the 300zx is a great car, but you have to take care of the engine, cause it'll cost you big $$ to fix, the engine is ment to take 8 hours to get out. If you get a good one and take care of it, it will be a great car.

Is the one your looking at have Twin Turbos?

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1087164
Share on other sites

the 300zx is a great car, but you have to take care of the engine, cause it'll cost you big $$ to fix, the engine is ment to take 8 hours to get out.  If you get a good one and take care of it, it will be a great car.

Is the one your looking at have Twin Turbos?

Yes it is the TT. Why is that?

- J.

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1088003
Share on other sites

the VG30DETT are a very hard motor to work on with very limited space in/around the engine bay + are always needing tunes to be done once u put a little boost under em size is A big prob as is driveability when trying to park as u have BIG blind spots from the size of the door/pillar's

areas to watch on the body are if its a targa (being a TT it would be a Fair Lady with Targa roof) is the drains in the roof & watch the rust around em also the under side of the targa roof around the seals get rust under the seals (what Year Mod is it??)

Tappet cover leaks are almost always there & TPS probs are common the 300Zx's run the same set up as a R31 with the air flow system The "Hot Wire" ones

thats all I can think of at this time

but yeah over all there not a bad car if u like the big old sports cars :rant:

I was looking at one a little while ago the old shape this is the one in the pic

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1088915
Share on other sites

  • 4 weeks later...

Meh, most skyline owners will bag the Z. Having driven them I'd say that if it wasn't for them being a pain to work on I would have got one rather than my 'line. Standard, the Z feels faster & more stable in corners than any standard 'line I've driven.

'206'kW (closer to 230 on an engine dyno), 390Nm at usable rpm, low centre of gravity, leather interior (on some), wide track, T-tops (on some), etc.

Unfortunately, as said before, they will be more expensive to maintain & drink a bit more Ultimate than your average 'line

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1117328
Share on other sites

they're excellent cars as long as you keep everything running in good order service wise. Not quite as reliable as an RB and like the guys here have stated they eat a lot more juice than a average RB.

I'm driving my mates TT 2seater manual atm and there no lightly modded Skyline that will come close to it even handling wise.

Just don't try and it a Zed sideways as they're not quite as controllable in those conditions compared to a Skyline!

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1117510
Share on other sites

My sister used to drive a TT 300zx. DAMN it was quick. just light mods, fmic, exhuast, boost controller etc.

Overheating is a big issue due to the size of the engine bay, and manual gearboxes in the 300zx are shit house, need to shift pretty easy. Other than that, with a sweet veilside kit and some fat rims, i would take one over a GTST anyday, over a GTR well thats a different story!!

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1117915
Share on other sites

I've driven a few, here are a few words that sum up my thoughts:

great fun,

quick,

dated model, bit still look cool

many poor design features (overheating and suspension problems),

expensive to maintain,

totally useless unless your only have yourself and a passenger to transport,

heavy,

cheap for such a quick car,

very hard to find a good one,

bit like an way overweight go-kart.

impossible to work on unless you have a hoist (can't even change oil yourself).

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1118008
Share on other sites

Rubbish JCM, there are good one out there, thats like saying there are no good GTST's out there as they have all been thrashed. And believe me some people have actually said this when I was looking. Yeah they are a little squeezy to work on and the first ever prob I had was with the radiator but that was cause the dum arse who owned it before me used just water and no coolant, DERRRR. Yes you have to maintain and treat them well but so does a Skyline if you want it to last. Skylines aint that light either in reality but neither are as heavy as a V8 flabadore. I can tell you they 300s look great go hard handle awesome and have some style. The gearboxs I hear from reliable sources are as strong as hell.

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1118732
Share on other sites

  • 4 months later...

They're awesome cars. I have an auto TT 2+2.

I personally think they leave all skylines for dead in the looks department.

If you buy one that has been looked after (bit of luck helps) then you won't have any extra issues than your average 15 year old car. Keep up on the maintenence and you'll be fine. I wouldn't buy one unless you are a car enthusiast and preparred to spend money on it and not skimp on things.

The interior rules, I love the layout. Much nicer looking that most cars. The targa top is wicked and who cares about the lack of room - it's a sports car :rofl:

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1296298
Share on other sites

im considering one of these aswell...

the things im concerned about are the cost of modifications and how they're apparently so hard to work on.

because they're twin turbo, im guessing that means 2 exhausts, one off each turbo... double the cost there...

upgrading the intercooler... im guessing there isnt any / many off the shelf items to suit the twin turbo unless you make up a collector before the intercooler's inlet

and also... upgrading the turbos, im guessing this will be an expensive process too... have many people tried a single turbo set up?

is there a piggy back computer going around for them?

so is 206kw the power rating for them? on drive.com.au it said 155kw for the turbo and 168kw for the n/a? seemed a bit funny to me!

sorry about all the questions!

mat

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1305287
Share on other sites

I've driven a few, here are a few words that sum up my thoughts:  

great fun,  

quick,  

dated model, bit still look cool

many poor design features (overheating and suspension problems),  

expensive to maintain,  

totally useless unless your only have yourself and a passenger to transport,  

heavy,  

cheap for such a quick car,  

very hard to find a good one,  

bit like an way overweight go-kart.  

impossible to work on unless you have a hoist (can't even change oil yourself).

Being the owner of a Zed, I can personally say that I have loved every minute of owning the car. I have pulled the motor for service/upgrades, as well as replacing the rear subframe/suspension components due to a minor incursion with a curb (bad luck in the rain). I have an NA, but it is a slicktop. Since you guys have access to slicktop TT's, I wouldn't pursue the T-Top models unless you really like the sun. The hardtops are more of a purists car, and offer better handling obviously. I don't really care for the T-Top models anyways. Plus, I think the fact that the Z32 was made for nearly 10 years speaks for itself.

Bottom line, is that you really really have to love the Z to enjoy it, as well as put up with its everyday quirks...I have, and it has been very rewarding so far

........but I would kill for an R32...you lucky b@&$^%rds!! :P

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1307247
Share on other sites

  • 3 weeks later...
the VG30DETT are a very hard motor to work on with very limited space in/around the engine bay + are always needing tunes to be done once u put a little boost under em size is A big prob as is driveability when trying to park as u have BIG blind spots from the size of the door/pillar's

areas to watch on the body are if its a targa (being a TT it would be a Fair Lady with Targa roof) is the drains in the roof & watch the rust around em also the under side of the targa roof around the seals get rust under the seals (what Year Mod is it??)

Tappet cover leaks are almost always there & TPS probs are common the 300Zx's run the same set up as a R31 with the air flow system The "Hot Wire" ones

thats all I can think of at this time

but yeah over all there not a bad car if u like the big old sports cars :rofl:

I was looking at one a little while ago the old shape this is the one in the pic

update :) I now have a Z31 300zx :D c pic :wassup: soon to have new wheels fitted too fingers crossed :headspin:

Link to comment
https://www.sau.com.au/forums/topic/55642-300zx/#findComment-1339614
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...