Jump to content
SAU Community

Recommended Posts

GTR - Grand Touring Racecar? or something like that... i'm not sure...

basically you have

GTS - N/A 2.0L (R32) or 2.5L (R33)

GTSt - Single Turbo

GTS4 - 4WD N/A or Turbo

GTR - Race homologation model... basically made so that the car is allowed to race in production car races like the JGTC.

Then there's the GTE, GTX, GT-t and other specs depending on what model you look at...

and there's also sub-specifications like "Type M","Type S", "Type J" and "V-Spec", "V Selection" etc etc.

Confused?

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

but to answer your question, no the R in GTR dosen't mean it has an RB in it...

the First generation Skyline GTR in 1964, had a 2.0L DOHC 4 cylinder engine.

PGC10/KPGC10 - 1st generation GTR (1964)

KPGC110 - 2nd generation GTR (1972)

BNR32 - 3rd generation GTR (05/1989)

BCNR33 - 4th generation GTR (10/1993)

BNR34 - 5th generation GTR (1998?)

There probably will be another GTR later down the track... but as you can see how there was a hop from the KPGC110 to the BNR32, there will be a hop from the BNR34 to whatever it is, as rezz said when the technology changes.

the First generation Skyline GTR in 1964, had a 2.0L DOHC 4 cylinder engine...
Aaah you're talking about the PGC-10 GT-R aren't you? If you are, it was released in 1969 (not '64) and it had an S20 DOHC inline-6 (not 4 cyl.)

thanks rezz... oops sorry about the confusion... the engine was called a DOHC4, it was a 6 cylinder... the engine was developed in 1964, for the Prince R380 race car, and in 1967-68 it was loaded into the GT-B Skyline. Then raced in 1969 as the first GTR.

I could have my dates slightly wrong tho...

thanks rezz... oops sorry about the confusion... the engine was called a DOHC4, it was a 6 cylinder... the engine was developed in 1964, for the Prince R380 race car, and in 1967-68 it was loaded into the GT-B Skyline. Then raced in 1969 as the first GTR.

I could have my dates slightly wrong tho...

yep....seems to be a trend :spank:

but to answer your question, no the R in GTR dosen't mean it has an RB in it...

the First generation Skyline GTR in 1964, had a 2.0L DOHC 4 cylinder engine.

PGC10/KPGC10 - 1st generation GTR (1964)

KPGC110 - 2nd generation GTR (1972)

BNR32 - 3rd generation GTR (05/1989)

BCNR33 - 4th generation GTR (10/1993)  

BNR34 - 5th generation GTR (1998?)

There probably will be another GTR later down the track... but as you can see how there was a hop from the KPGC110 to the BNR32, there will be a hop from the BNR34 to whatever it is, as rezz said when the technology changes.

Type J is a specification for the N/A series, its like the class below the Type S.

There's also a Type X which is for 4 doors.

GTR - Grand Touring Racecar? or something like that... i'm not sure...

basically you have

GTS - N/A 2.0L (R32) or 2.5L (R33)

GTSt - Single Turbo

GTS4 - 4WD N/A or Turbo

GTR - Race homologation model... basically made so that the car is allowed to race in production car races like the JGTC.

GTR actually stands for - Gran Turismo Racing

GTS stand for - Gran Turismo Sports

GTS-t stands for - Gran Turismo Sports turbo

Very interesting discussion keep it up.

Oh and the J's (Jacks) silvias are pretty rare over here as people who wanted a non turbo silvia always got Q's (queens) as the J's was the economy model and Q's was the optioned model.

The origins of the words Gran Turismo takes us back into the 17th and 18th century where European aristocrats traveled long distances across the continent in horse-drawn carriages. Today, the words Gran Turismo define a car designed and suited for long distance travel.

:spank: khookle ees yor frend

Also have you guys noticed recently as the drift crazy has hit town that J's silvia headlights, the poverty non projector style ones with the 2 square lights, are all the rage?

I think you will find that the car designation and motor designation are all coincidental. As I remember the R30 Skyline had an 'L' series engine, and the R31 had an 'RB' series engine or a 'CA20' engine when badged as a Pintara. The letters in front of the car designation are usually a quick guide to show what vehicle it is, as an example only: KMCR31. R31=chassis desination. 'K' might mean 4 door. 'M' might mean sedan as opposed to 4dr pillarless hardtop. 'C' might mean RB30 engine.

This is the way Nissan did it in the 70' and 80's so I assume they still do it now.

I think you will find that the car designation and motor designation are all coincidental. As I remember the R30 Skyline had an 'L' series engine, and the R31 had an 'RB' series engine or a 'CA20' engine when badged as a Pintara. The letters in front of the car designation are usually a quick guide to show what vehicle it is, as an example only: KMCR31. R31=chassis desination. 'K' might mean 4 door. 'M' might mean sedan as opposed to 4dr pillarless hardtop. 'C' might mean RB30 engine.

This is the way Nissan did it in the 70' and 80's so I assume they still do it now.

You haven't read the thread have you?
Just like the S15 - I've seen on Nissan Japan and Carview's websites, it's got the type as GF-S15. Both S13 and S14 appear as E-S13 & E-S14 on Carview's website.  

http://history.nissan.co.jp/SILVIA/S15/020...SPEC/index.html

http://www.carview.co.jp/vip/specification...SILVIA/1999.asp

The following is the meaning behind the name to some of nissan's cars - for those who is interested. You'll need babelfish for translation if u cant read japanese like me.  

http://www.nissan.co.jp/MUSEUM/CARNAME/index.html

The E and GF before a model indicates 1st and 2nd series afaik. Toyota use this too. I've been looking at Chasers, and they are E-JZX100 if they're a series 1, or a GF-JZX100 if they're a series 2.

I'm sure it stands for something as both Nissan and Toyota use it. Maybe some of the Japanese residents can help out here?

EDIT: Btw, it would be interesting to see if the S14A had a GF in front of its model code. If it did, then that would seem to validate my theory.

the E in the front of a car, like my E-HCR and the E-ECR33 designate that it was built using the renewed emssions standards. usually people don't say E-ECR33 because all R33's were built with the new emissions standards, wheras with some R32's they weren't and some were. No one really cares about the E in front to be honest, or maybe they just don't know what it is lol.

in toyotas I believe a 4AGE engine is before the emissions, and a 4AGEU was after the emission laws or something. I'm not too sure on my toyotas.

The E and GF before a model indicates 1st and 2nd series afaik. Toyota use this too. I've been looking at Chasers, and they are E-JZX100 if they're a series 1, or a GF-JZX100 if they're a series 2.

I'm sure it stands for something as both Nissan and Toyota use it. Maybe some of the Japanese residents can help out here?

EDIT: Btw, it would be interesting to see if the S14A had a GF in front of its model code. If it did, then that would seem to validate my theory.

Perhaps the car manufacturers should explain these mystery alphabets..it could be some sort car manufacturer's code...or maybe just a random alphabet they thought up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...