Jump to content
SAU Community

Recommended Posts

Guys, can any one tell me the address of the place where i can get one. It sounds very interesting and i am very keen to have one.

Tks...

You can get some good ones on ebay, but be carefull as there are some really shit ones around.

Do you want a really small one or a mid size one like mine?

MR R33 GTST

You can buy the supercrargers for the 4 strokes at a wrecker in dandenong.

You will need other mod's before the supercharger will work properly, and the stock carb, exhaust, intake etc and shitty

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

Denham, you got ya bike licence? Coz for that bike you need one. It probably needs to be registered too...

Those slow mini ones fall into a legal grey area coz they have less than 200watts, but anything with more power is considered a vehicle and road laws apply...

Denham, you got ya bike licence? Coz for that bike you need one. It probably needs to be registered too...

Those slow mini ones fall into a legal grey area coz they have less than 200watts, but anything with more power is considered a vehicle and road laws apply...

The answers to that would be NO and NO!!!! And do i intend to get em? NO!! :D

I dont ride it on the roads as a form of transport, only in deserted areas away from traffic.

  • 2 months later...

Any chance of these lil bikes fitting in the boot of a skyline (even with an occy strap holding it closed)?

If it's a yes then i'll be first in line for one because there's no way the 900 will fit in my boot. :(

2 strokes sound like whipper snippers and use a mixture of oil and petrol in the mixture as a form of lubrication. 4 strokes use straight unleaded fuel and fun alot better and cleaner than a 2 stroke.

If you are gonna get a chopper get a 4 stroke 110cc as 49cc 2 strokes are slow

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • Take the fall as a warning sign for future endeavours  Stay safe mate
    • hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...