Jump to content
SAU Community

Recommended Posts

;)

im sure uve all seen it... does anyone have one in Australia yet?

Not with the running gear... ive seen one of the 240RS's already... the actual R34 GTR Front end? Does anyone in Australia have one yet?

I ask because my gf is in need of something new as the soarer doesnt suit her needs anymore... we looked at a stagea today at the dealerships... it was a 97 model.. lowish ks... pretty stock and only 18k.

Thats pretty cheap and i was thinking about importing the R34 GTR front end conversion for it if she does end up getting it to do something a little different. altho im sure knowing my gf she will change her mind again and get something like a Jazz.

incase u dont know what im talking about...

wagonr34.jpg

StageaR34-1.jpg

Link to comment
https://www.sau.com.au/forums/topic/56525-gtr-wagon/
Share on other sites

I do believe skyline imports already has a masa kit, compliance plates for cars that already have a masa kit on it, and a mould of the masa kit. But yeah it's probably cheaper to get it put on in japan, as masa's not the only one that does that kit now.

I dunno about skyline import's moulds, last time they tried to do the kakimoto R33 kit, instead of adjusting the wheels with a castor kit so that they didn't rub against the tyre well, they modified the kit so the wheel arch was further back.

Link to comment
https://www.sau.com.au/forums/topic/56525-gtr-wagon/#findComment-1094875
Share on other sites

I do believe skyline imports already has a masa kit, compliance plates for cars that already have a masa kit on it, and a mould of the masa kit.

They have the kit up to $10,000 fitted was the last quote I was given off them, they are not legal due to the fibrelass Guards and the cars they have converted would be shitty stagea's which needed a re-spray.

We are working on full repo guards out of steel.

Link to comment
https://www.sau.com.au/forums/topic/56525-gtr-wagon/#findComment-1094878
Share on other sites

yeah i know of the MASA ones... like mmonkey said theres a few places in Japan doing it at them at the moment. Problem is i would have to get it shipped as my gf wants a car thats already here in the country so i wont be able to put it on in japan.

so what would u basically need?

-Guards

-Lights

-Bonnet

-Bonnet latch

-Bar

that would be about it wouldnt it?

the hardest thing to get would probably be the guards as u would have to manufacture up ones that fit on the stagea and that the lines flow through the whole car... you couldnt just cut the front of it to fit the lights could you?

Link to comment
https://www.sau.com.au/forums/topic/56525-gtr-wagon/#findComment-1094902
Share on other sites

and bumper support, the rest of the brackets you should be able to fabricate using pieces of steel

Why don't you just get standard GTR guards (metal), and fit them to the stagea, if they're too long, shorten them, and then blend it with bog. If they're too short, add more with fibreglass. Surely that's gonna cost you waaaaay less than $10,000

Link to comment
https://www.sau.com.au/forums/topic/56525-gtr-wagon/#findComment-1094907
Share on other sites

inark, there is another thread on the R-34-style front here ...

As per SK's discovery, the R-34 and C-34 guards aren't interchangeable, which rules out Shan (funkymonkey)'s suggestion. I think there was also a mention of a body crease that's on the R-34 that doesn't appear on the C-34, or vice-versa.

They do look hot though, don't they?

mcnamg's photo gallery is GOLD for Stagea pics, as I'm sure all of you will agree...

It's here. Nice work, Glenn! :(

Nick T

Link to comment
https://www.sau.com.au/forums/topic/56525-gtr-wagon/#findComment-1095890
Share on other sites

the only thing that you use that isnt genuine or aftermarket r34 gear is the special stagea specific guards which at the moment are frp which is pretty crap if you ask me.

there are also other pics in my gallery showing some other stageas with different kits on them feel free to have a look through them.

thanks for the plug goldzilla ;)

Link to comment
https://www.sau.com.au/forums/topic/56525-gtr-wagon/#findComment-1096188
Share on other sites

Inark,

I think Gary (QLD SAU GURU) has a 260rs, dont think anyone has compliance for them yet, but I hope it happens soon as I am buying one in 10 months - can wait.

Ken

Theres a genuine 260RS here in melb... it belongs to some guy that used to own a car yard... awesome looking thing... even with the rice :D will try and find the pics i took of it one night on the way home from work.

Link to comment
https://www.sau.com.au/forums/topic/56525-gtr-wagon/#findComment-1097143
Share on other sites

they have to be one of the best lookinwagons ive ever seen (even tho they do bare a slight resemblance to the ever hated VOLVO lol)... especially with the huge front mount grinning at u haha.

Link to comment
https://www.sau.com.au/forums/topic/56525-gtr-wagon/#findComment-1098033
Share on other sites

nothings not interchangeable... hell we put an R32 front on a 180sx :cheers: (well someone else did for us). All you need to do is make up adapter brackets and probably make extra mounting holes in the chassis (probably will weaken the structure) then you use bog or fibreglass depending on how much needs to be done, to blend the bits together.

Its been done since waaaaay back in the day :D

Link to comment
https://www.sau.com.au/forums/topic/56525-gtr-wagon/#findComment-1099060
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...