Jump to content
SAU Community

Recommended Posts

R35GTR Frequently Asked Questions

This FAQ was created to help answer some of the frequently asked questions encountered at r35forum.com, or at SAU. Please note that much of the information in this document is based on speculation, rumor, and incomplete information, as NISSAN MOTOR CO., LTD. has yet to announce much formal information on the 2007 Nissan R35GTR. As well, please note "r35gtr" is used here throughout, but Nissan has not mentioned the next gtr's name, they have but called it the GTR only. I use "r35gtr" throughout because many people associate it with that title, but you can substitute it for next gtr if you like. Once Nissan does provide a name for it, I'll be sure to include it in this FAQ and overwride the "r35gtr."

Table of Contents

1. Introduction

1a. History

1b. Vehicle Overview

2. What are the specs of the R35GTR?

2a. Body-design, Size, and Weight

2b. Engine

2c. Transmission

2d. Wheels and Brakes

3. How well will it perform?

3a. General

3b. Will the R35 outperform luxury sport cars like the Porsche 911 Turbo?

4. When will it be released?

5. How much will it cost and what options will be available?

6. Miscellaneous

6a. Is the R35GTR the replacement for the Nissan Skyline R34 GTR?

6b. Will it be N/A (Naturally Aspirated), or will it be turbo?

6c. What other related cars might Nissan be developing?

7. Where can I find more information, articles, and pictures about the R35GTR?

8. Summary

9. Who wrote this R35GTR FAQ?

1. Introduction

1a. History

The R35GTR will be the hard work of 7 progressive years. Nissan R&D, since 2000 had plans of the 11th generation GTR. The Nissan Skyline R34 GTR is in no way similar to the R35GTR. The R35GTR is separate from the Skyline lineage, so there is no direct correlation between any precedent models of the GTR. The RB26DETT had poor emissions always, and the R34 GTR had low mpg ratings. The engine produced 280hp (320hp unofficially), and it was an inline six, 2.6 litre twin turbo engine. None of the Skyline or GTR models were ever released in the U.S. although import companies like RbMotoring has made it possible to import and register one. In Japan, the R34 GTR was discontinued in 2002, with the Nur and M-Spec limited edition models. The V36 Skyline, due out 2006 will be based on the previous skyline coupe AND sedan models.

In 2001, Nissan unveiled a concept, the GTR Concept in 2001 at the Tokyo Motor Show. As a result, many were skeptical of the design so Nissan went back to the drawing board and has kept hush about it since then. This car is the direct predecessor to the R35GTR. The engine spec's of the GTR Concept were never known, nor mentioned, but it is rumored to have had no engine at the show, although the promo video featuring the GTR Concept was a running model, suspected to have had a VQ engine from a track model Fairlady Z33. The engine should have made about 250-300hp at crank. Since its debut, Nissan has stated to make a production model for 2007. It is noted to be unveiled in late 2006 at the Geneva Auto Show.

1b. Vehicle Overview

We know that the R35GTR will have 2 doors, and four real bucket seats, and is a rear-wheel drive (not leaning toward's AWD) design based around Nissan's VQ engine. Like Nissan's previous Skyline models, the R35GTR will be a sporty car and is expected to have excellent handling and great acceleration. Rumor has it that the R35GTR will have stiffer handling than its previous counterparts, which were known for their handling in tight corners. The R35GTR will fall into categories like sports car, sports coupe, etc. There are no current length measurements.

The latest specifications on the VQ32DETT engine have it making an estimated 480ps at 7200rpm. Why go with the VQ and turbo it? Well, due to emission problems Nissan had with the RB26DETT, it has dropped it and made a new designed VQ engine with better emissions and gas mileage, also reduces oil consumption with a "semi-wet sump" system. See the section on specifications for more details on the engine.

2. What are the specs of the R35GTR?

2a. Body-design, Size, and Weight

In terms of weight, there is a lot of speculation on how much the car will weigh. Nissan hasn't traditionally built lightweight sports cars so we suspect the R35GTR to be within 3200 pounds like the 350z, and its older counterparts. If worst comes to worst, expect it to be tipping 3400 pounds. Carbon and Aluminum Panels will provide maximum rigidity. The Nissan R35GTR will be based on a new FR-L platform (Primary Front engine/Rear wheel drive transaxle, motor-assisted front wheel drive or "e-4WD") due to good results from testing.

2b. Engine

As mentioned above, the R35GTR is based around Nissan's VQ engine, but it is now assisted by twin turbo's. 3.2 litres seems reasonably enough like a displacement for a car to produce 480ps. The engine will be a high revving, high power, and high torque engine. The VQ32DETT generates an estimated 480ps @ 7,200rpm, 58.0kg/m @ 5,200rpm. Compared to the twin-turbo RB26DETT in the tenth generation R34 GTR, the new VQ32DETT engine has a large number of improvements. The VQ is almost identical to that of the 350z's, so you just need to look at the specs of the 350z's engine, but take note of the .2 litre addition, twin turbo's, and new design and better efficiency.

2c. Transmission

Current information has the R35GTR coming with a new 7-speed sequential manual getrag transmission mated to the 480ps VQ32DETT described above.

2d. Wheels and Brakes

The wheel package will be large. What is expected is 20 inch aluminum rims on 255/40/20 front, 285/35/20 rear tire size Z rated performance tires. It is strange though, as the latest taped up test mule in Nurburgring had 18x8 inch rims, and previously before this, the same setup, this time though the wheel's were borrowed from the R34 Skyline GTR.

3. How well will it perform?

3a. General

Since the car will most likely be tipping at around 3000 pounds, and it will have around 480ps, it is expected to perform like a race car should perform. Nissan's aim with the R35GTR is to top all other previous Skyline GTR models, and with a 3.2 V-6 twin turbo engine, it should be more than capable. Understeer will not be an issue, and the car will deliver lots of torque for good pull. The R35GTR has a mid high RPM range, peak power reaching at 7,200rpm, but with some modifications one can expect the car to top at around 8,500rpm. As for the driveline, all that is known is that it will be a 7-speed sequential manual getrag transmission, but you can expect tight gear ratios for super quick launches. Why they picked getrag AGAIN, is unknown though. For 0-60 times, expect sub 5's.

3b. Will the R35 outperform luxury sport cars like the Porsche 911 Turbo?

Well for one, I don't suggest going out and intending to street race anything. Really though, it depends on the driver and his/her experience. Since Nissan's exact target to beat is the Porsche 911 Turbo, I am positive it will give Porsche a run for its money. They have similar specs, and Nissan based their final decisions on the next gtr's spec's based on the Porsche's 911 Turbo, just adding twin turbo, an extra 50hp or so, and having a 3.2 instead of a 3.6 litre.

4. When will it be released?

Nissan does not have an official time of release, but Carlos Ghosn, chair of Nissan said the next gtr would arrive no later than 2007. It is expected to first show up either at the Geneva Auto Show, or the Tokyo Motor Show (maybe even at TAS.)

5. How much will it cost and what options will be available?

Most of this is speculation, but really as far as options go, there won't be much. Nissan will make it a priority to sell this car in a high price range, due to all the performance parts it will come with. It seems reasonable to have it priced at 50-60k, if it is to compete with Porsche, Audi, BMW, etc. Other models might be more expensive, I don't mean other models' but other trims or special (limited) edition trims. There is no word on a hardtop (targa) model, or a roadster like the 350z. Since the R35GTR will come with all you'd want, the only important option would be an extended warranty, I suppose. It will come with HID's, bucket seats, (possibly nav system), etc. No word on color choices, but the spy shot car's have all been dressed in toned down silver, and/or titanium grey as well the gtr concept was silver. The latest test mule was spotted at Nurburgring, being photographed while undergoing track testing in Germany.

6. Miscellaneous

6a. Is the R35GTR the replacement for the Nissan Skyline R34 GTR?

No. The R35 is a different model from the R34 GTR. Additionally, the new GTR has broken off from the Skyline lineage.

6b. Will it be N/A (Naturally Aspirated), or will it be turbo?

As far as we know, Nissan has plans of having a Twin electric-assisted Turbo VQ engine. Rumors of a NA 3.6 or 4.2 are long gone.

6c. What other related cars might Nissan be developing?

From what we know, Nissan is planning to reintroduce the 240sx in 2007 in the states, as well launch the S16 Silvia in Japan, and possibly the same in the U.K. Most of it is from speculation and rumor but we are confident much of this is true. Nissan is also possibly planning a re-update of the 350z.

Nismo R35GTR Model

Nismo is the performance branch for Nissan Motors Japan. How they can up the ante of the R35GTR is unknown, but expect them to offer a higher performance version. The power figures of the next gtr seem a bit high, but who knows. I would have expected 300hp, and for then Nismo to have a 400hp crate engine for the future model, something in those lines. The R35GTR will have a new distinct chassis, FR-L, separate from all other models.

Nissan V36 Skyline

Nissan will introduce the V36 Skyline in 2006, which will be where Nissan left the V35 Skyline--Fuga oriented. Again, this is all speculation but it is deemed to be true.

7. Where can I find more information, articles, and pictures about the R35GTR?

You can visit r35forum.com, or r35gtr.com. You can also try looking in the Next Skyline forum at skylinesaustralia.com. In 2004, Road and Track published an article on the "2007 Nissan GTR." Many other import magazines have some snippet on it. Search at yahoo.com or google.com for "r35gtr" where you will find more information. This FAQ though, and the sites of the FAQ creators will contain the most concrete and valid up-to-date information on the R35GTR online though.

If you don't find the information you need in this FAQ or that article, you can definitely go to r35forum.com and look up posts with the search engine. If you don't find what you want, make a question at the forum, and we'll try to answer it in the best way possible.

8. Summary

2007 Nissan R35GTR

Expected Release: TBD~2007

Body Style: 2 doors coupe, 4 seats

Weight: Most likely under 3200 lb.

Drivetrain: 480ps @ 7,200rpm, 58.0kg/m @ 5,200rpm. 3.2L V6 Twin electric-assisted Turbo engine. Rear-wheel drive 7-speed sequential manual getrag transmission

Steering/Suspension: rack & pinion with double-wishbone front and multi-link rear suspension

Wheels: 255/40/20 front, 285/35/20 rear tire size on 20" wheels.

Performance: 0-60 approx. sub 5 seconds, 1/4 mile approx. 13.0 sec due to power figure estimates.

9. Who wrote this R35GTR FAQ?

This R35GTR FAQ was written by Dave (Dave on r35forum.com) on 12/01/04. Additional information and suggestions were supplied by members on skylineaustralia.com and Mark (Mark on r35gtr.com, v35gtr.com.) Corrections or new information should be sent to Dave at [email protected] or private message at r35forum.com for inclusion in later versions.

Link to comment
https://www.sau.com.au/forums/topic/57057-next-gtr-r35-faq/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Please take my name off. Thanks.

That info was just translated by me from some Japanese magazines, so if you state that thats all I did (and all you did was read it) then thats ok... I just don't want it to look like I helped out when I didn't.

Link to comment
https://www.sau.com.au/forums/topic/57057-next-gtr-r35-faq/#findComment-1103080
Share on other sites

I just put that some of the info was borrowed from you, when you posted it. I put that I wrote it mostly, but I tried to leave a plug for this forum since I really do like it. Do you still want me to change it, it will bring more user's who are interested, and I want to make sure that the people who are involved are known--in a good manner. Do you think the FAQ is good, did you have a read-over?

Link to comment
https://www.sau.com.au/forums/topic/57057-next-gtr-r35-faq/#findComment-1103083
Share on other sites

For the love of god, stop calling it an R35! :) How can you say it'll have a VQ engine and call it an R in the same line?

Also how is the GTR broken off the lineage of the Skyline? You fail to understand that the GTR model is made to homologate the series so as to qualify for Group A competitions. Otherwise there's no need for a GTR. Unless Nissan intend to just use the name for the hell of it, which I seriously doubt will happen given the amount of cult following it has and the number of companies that will be willing to use it in motorsports (Nismo/Xanavi and Calsonic being two very big ones). No skyline = no GTR model.

That really dosen't sound like an FAQ, it sounds more like personal speculation/review.

Link to comment
https://www.sau.com.au/forums/topic/57057-next-gtr-r35-faq/#findComment-1103094
Share on other sites

For the love of god, stop calling it an R35! :) How can you say it'll have a VQ engine and call it an R in the same line?

Also how is the GTR broken off the lineage of the Skyline? You fail to understand that the GTR model is made to homologate the series so as to qualify for Group A competitions. Otherwise there's no need for a GTR. Unless Nissan intend to just use the name for the hell of it, which I seriously doubt will happen given the amount of cult following it has and the number of companies that will be willing to use it in motorsports (Nismo/Xanavi and Calsonic being two very big ones). No skyline = no GTR model.

That really dosen't sound like an FAQ, it sounds more like personal speculation/review.

exactly
Link to comment
https://www.sau.com.au/forums/topic/57057-next-gtr-r35-faq/#findComment-1103315
Share on other sites

6c. What other related cars might Nissan be developing?

From what we know, Nissan is planning to reintroduce the 240sx in 2007 in the states, as well launch the S16 Silvia in Japan, and possibly the same in the U.K. Most of it is from speculation and rumor but we are confident much of this is true. Nissan is also possibly planning a re-update of the 350z.

Rezz can you give any other info on this? The sound of a S16 gets me excited.

Link to comment
https://www.sau.com.au/forums/topic/57057-next-gtr-r35-faq/#findComment-1107103
Share on other sites

Rezz can you give any other info on this? The sound of a S16 gets me excited.
I've got nothing to do with that FAQ, and I've never said anything about an S16 Silvia... (well, almost nothing)
Link to comment
https://www.sau.com.au/forums/topic/57057-next-gtr-r35-faq/#findComment-1107153
Share on other sites

This is all Nissan's fault.

They confused the weak-minded by calling the Chassis V35.

Since the last Skyline was R34, people see the 35 and stick an R next to it.

They should have just skipped some numbers or something and called it the V40 or something (like the R30 was the start of a new generation).

Link to comment
https://www.sau.com.au/forums/topic/57057-next-gtr-r35-faq/#findComment-1107167
Share on other sites

I know rezz said it will not be 'r35' but most people do not know it by v35. If it does come to be known by that, ill chage it, so no worries. I don't like 'r35' either, but it's not for me. Its for other enthusiast's who know it by 'R' designation. :P

just made it to help, lol. *smile*

Link to comment
https://www.sau.com.au/forums/topic/57057-next-gtr-r35-faq/#findComment-1107981
Share on other sites

You could just as easily call it "2007 GT-R".

Really, you just perpetuating something that hasn't been confirmed or even hinted at by the media. You can't just say "most people know as R35 so thats what I'll call it for them" if you're going to make an FAQ about it!

The next GT-R or 2007 GT-R would be best in this case.

Link to comment
https://www.sau.com.au/forums/topic/57057-next-gtr-r35-faq/#findComment-1108153
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...