gtr oil cooler, where will it fit ???

[wyld1300]

hi all ,

I have an R32 gtr an after purchasing this 16 row oil cooler i am finding it hard to position it somewhere as there is just NO room..... It is a full g-rex kit with filter re-location an thermo. ANY IDEAS ???????

[SteveL]

I have an R32 gtr an after purchasing this 16 row oil cooler i am finding it hard to position it somewhere as there is just NO room..... It is a full g-rex kit with filter re-location an thermo.

Mine is mounted in front of the aircon condensor next to the aircon receiver dryer (drivers side of the bonnet latch). It's a tight fit but mine is not a 16 row - total measurements of the oil cooler on my car is about 250mm long by about 140mm deep and 50mm thick. There's no way anything larger would fit.

The cooler already came fitted to my car when I bought it (recently came in from Japan) and it also has the GREX oil filter re-locator kit. To fit the cooler they also had to re-mount the power steering cooler. I'm not greatly happy with the job they did, so I took the front bar off to see if I could move it elsewhere, but there is nowhere else unless I buy a smaller oil cooler.....

[Ronin 09]

mine is here, but not so good for flow...

[Ronin 09]

remote filter, crossmember driver's side: