Jump to content
SAU Community

Recommended Posts

Having a seperate wastegate pipe helps increase flow which makes it easier for the turbo to flow more air and make more power

a proper split dump pipe will seperate the wastegate gases from the normal turbine exhaust gas and join back in 30cm+ down the pipe which eliminates alot of the turbulence involved when both are trying to enter the same piece of 3" piping

not many places make proper split dumps, CES are the best as far as i know

oh and a proper split dump pipe is actually the dump and frontpipe as one :P

Link to comment
https://www.sau.com.au/forums/topic/57418-dump-pipes/#findComment-1107793
Share on other sites

It surprises me VERY much that many japanese tuning shops STILL dont make proper split dump(and front) pipes, I would have expected alot more, given their so called research and development, I used to have alot of faith in japanese products. Good to see an Australian company can make a superior product for a turbo car....

Link to comment
https://www.sau.com.au/forums/topic/57418-dump-pipes/#findComment-1108262
Share on other sites

It surprises me VERY much that  many japanese tuning shops STILL dont make proper split dump(and front) pipes, I would have expected alot more, given their so called research and development, I used to have alot of faith in japanese products. Good to see an Australian company can make a superior product for a turbo car....

and your evidence of this is?

what do you consider "proper split dump(and front) pipes"?

seems like a throwaway blanket statement...

Link to comment
https://www.sau.com.au/forums/topic/57418-dump-pipes/#findComment-1108818
Share on other sites

CES dump pipe in my opinion(which isnt professional in anyway) because:

- the wastegate pipe is longer than 20cm, which reduces turbulence in the gases

- the wastegate pipe enters in smoothly when it reconnects, flowing with the exhaust gas, rather then clashing with it. All these 'seem' to make boost come on quicker, better response etc.

The jap dump/fronts ive seen are either:

-single dump(no split)

-have a seperate pipe for the wastegate but is much too short

-the wastegate pipe connects at an almost right angle

Like i said, im no mechanic or engineer, i would love to believe that jap brands are better for jap cars, i dont mind paying the extra for a quality product.

Link to comment
https://www.sau.com.au/forums/topic/57418-dump-pipes/#findComment-1109220
Share on other sites

and more importantly does anyone make the trust copies for SRs and RBs ? :D

in short for SR's, no... if you want the best, either go for CES or Trust dump for SR's imo. the HKS split dump doesnt merge the wastegate and turbine gasses very well, they come in at too much of an angle causing turbulance.

the Trust dump is the *ONLY* dump pipe which merges the gasses *parallel* to each other, on the outside it looks like a large single mouth design, but on the inside it has internal walls which split the gasses till further down. all "copies" of the trust dump look the same (kinda) on the outside, like a large single mouth dump, but dont have the internal spliting.

the CES is self explanatory, it splits the gasses until much further down, eliminating much of the problem the HKS has with early merging and tight angle of entry...

my pick, would be the trust over the CES, because of cost factor, i find the CES prices to be ridicoulous especially considering how many problems they had with cracking...

Link to comment
https://www.sau.com.au/forums/topic/57418-dump-pipes/#findComment-1109941
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...