Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

SK - does Stagea have a single unit for Auto ECU or is it like the R32 & R33 Skyline where there's a main unit and a secondary auto controller?

Why i'm asking is i'm wondering if the R32 auto ECU would have extra code compared to the manual ECU considering there's a separate gearbox controller.

Thanx

Yeh get the biggest cooler you can get and make sure its mounted somewhere to work efficiently. The auto needs heat to work properly, but too much and it will do damage.

Ill be dismaying some myths to do with automatic skylines/stagea and standard ecu's in general along with sk,

Im aiming more for 240-250rwkw with either a GCG hiflow or GT-RS depending on how much money i have at the time.

The emanage aparantly STILL has problems with burning coils, as much as i hear they've fixed it, is as much as i hear its still blowing coils. :Oops:

IF they have fixed it 100%, then the Emanage would be a better option than an SAFC2+SITC combination.

Im confident i can get a Z32AFM and S15 Injectors running well on the standard ecu with just the SAFC2+SITC. The only other real option is emanage, and they are still very clouded in my opinion.

Either way, things look promising for all the automatic owners :)

I should be finished this project and have results to post in jan/feb :burnout:

I have 190 rwkw and the standard transmission cooler on my 34. It overheated a little once at Wakefield which is a tight track but that was after about 15 laps. Cooled it down and it didn't happen again. Can't see why you would need anymore than that for the street although I should be heading well into the 200's soon and will be thinking about a bigger trannie cooler for the track.

If you fit oversized injectors then you trim a large % of fuel out with the SAFC etc then the ECU thinks its under much less load and the Auto outputs see less load also so keep the trim needed as low as possible.

We use a datascan on the Dyno when tuning hi powered cars with an SAFC and find timing ETC gets out of hand.

  • 1 year later...

When you say to whack on bigger injectors and then trim the fuel down using the SAFC, how are you going to control these injectors? Don't you need an ECU that is capable of controlling the new injectors?

The standard ECU is only programmed to run the stock injectors as far as I understand... correct me if I'm wrong.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...