Jump to content
SAU Community

Recommended Posts

do they acept chques?

If they are like 99 percent of businesses, they won't release the goods (ie. your car) until the cheque is banked and cleared. Assuming it gets banked on the day you pay it can still take 2-3 days to clear.

IMHO you are better off doing a direct deposit over the counter.

LW.

steve ask ucb if you can use direct deposit, straight to their account over the internet. I did it with my broker (Intergroup) on my last car. Made things that much easier. If i remember right the steam cleaning place is part of the docks, or at least not far away. Mine didnt need a clean even though it was dusty as, and some Japanese cricket creature was living between the coil packs...

steve

Dont stress about the bill of landing

You should receive it in the mail by the end of this week

As for payment you can use direct deposit,cash or bank cheque.

I had the car delivered before I paid and then went to UCB and paid with a bank cheque.

Internet banking would of been easier however the limit for me was 2k

He'll send you an itemised invoice with all the charges by mail.

Quick tip,dont bother with picking the car up yourself,I had organised a tow but it wasnt

worth it when delivery was only $60 on a flat bed truck to my door

Cant tell you much about cleaning as I didnt need it done

As long as your interior is clean you wont have a drama.

The outside of mine was filthy when it arrived.

if you dont wanna fork out for towing just ring up the DPI here in Perth and get a temporary movement permit. Tell them your'e going from Freo to wherever else you wanna go (mates houses to show it off? :D ) then to your house.

It costs $14.95, pay by credit card, and it lets you drive it as soon as its ready!

If its anything like in Sydney, the car will have next to no petrol so take a jerry can of BP Ultimate with you so you at least have enough to get to the nearest petrol station.

Personally I don't think its a very good idea to drive the car, particularly if its been sitting in storage and/or waiting for a while to be shipped. Oils and lubricants (or rather, the special active ingredients in them) tend to break down over a couple of months. Plus you never know what the condition of the car will actually be like till you pick it up :)

LW.

ill check the oil and coolant etc before even starting the car. and even top it up  etc

steve

I am not talking about the oil and coolant levels, I am talking about the quality of the oil in the car. For starters it seems its a common thing in Japan to not bother servicing it properly if your about to sell it, so who knows how long its been since the last oil change (in terms of kilometres and time). Then there is the fact that its probably been sitting still for god knows how long waiting to be shipped: during that time the oil additives are likely to have broken down at least partially. Moreover, you have no idea what was put in last time and since its a reasonably expensive proposition if something goes bang, a tow job is not a bad idea IMHO.

LW.

Seems your question has been answered but here it is from my experience when I did it.

Stuck car on Ship in the UK.

Paperwork posted to me in Aus.

Shipping company made contact with me confirming the arrival date as it was only an ETA on the paperwork posted over.

My broker who I knew personally kept me up to date so here is happened with him:

The broker had to book a time to collect the container (which wasnt opened). There is only about a 48hour window to collect it in otherwise it goes off to storage and incurrs hefty fees.

The take it to AQIS who do not know you from Adam so have to go through your broker as well.

AQIS were not allowed to open it until I was there (I wanted to check everything was intact and nothing missing incase of an insurance claim)

AQIS unpack it and inspect everything (in my case the car was packed full of personal belongings so they went through everything)

AQIS normally take a couple of days to do this, they then inform the broker.

I paid my fee to the broker including all taxes as they have already paid on my behalf to AQIS.

Once all is cleared financially, I arranged a flat bed to pick the car up and take it to compliance.

Job done.

Well just about! About 7 weeks later I recieved another invoice for $80 from my broker who had in turn been invoiced by AQIS for "Addtional Quarantine Fees". This was crap and I argued it with them as for all they knew I could have moved house, left the country.

HTH

Iwells - I didnt know that from the orginal post nor that the percentage was that high. Cheers for pointing it out. I shall leave my post incase it helps someone but if anyone wants it removed, PM me.

in answer to the thread question.

when my car arrived i was sent out an invioce with everythign i have to pay, including the towing to my door...

i have to wait about 10 days, the car will then be towed to my house.. Then have to tow the car to be complied, then rego, then fun

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...