Jump to content
SAU Community

Recommended Posts

Hi guys, trying to track down the specs for the following following fluids in the car so I can change them:

- gearbox oil

- diff oil

- clutch cylinder oil

- engine oil

- power steer oil

I cant find anywhere that lists the specs of what the factory recommends (viscosity etc). I think i will go Mobile 1 5-50 for the engine, and Mobile 1 75W-90 for the diff and gearbox if I cant find any more details. I guess for the clutch cylinder/power steer I use standard powersteer oil.

I am just going to use generic coolant for the cooling system, and generic brake fluid too.

Anyone know where the factory specs/recommended specs are?

Ta

Conrad

Link to comment
https://www.sau.com.au/forums/topic/5821-fluid-changes-specs/
Share on other sites

I use Mobil 1 0W40, super thin stuff and works well. It's not the same as the stuff you get from K Mart, it's about $16/L but worth it. Try your local Mobil wholesaler, not a servo.

Use the highest temp brake fluid you can find. Castrol SRF is the top stuff but too exxy. ATE make a blue one which is very good. Don't use a silicon one as you will have to change all your seals over before you use it.

For the clutch just use the same brake fluid.

I'll try and dig out the gearbox and P/Steering specs.

Link to comment
https://www.sau.com.au/forums/topic/5821-fluid-changes-specs/#findComment-88219
Share on other sites

i reckon both 5W50 and 0W40 are a little thin. i use 10W40 AGIP oil for the engine. redline shockproof for the gearbox. std power steering fluid for ps. never changed diff oils...

having said that my cars a little thrashed so i go for thicker/designed for 'worn' mechanical part oils

Link to comment
https://www.sau.com.au/forums/topic/5821-fluid-changes-specs/#findComment-88698
Share on other sites

Originally posted by JiMiH

Where can you buy the Redline Shockproof stuff in Perth?

For gearboxes?

Quite a few places flog the stuff, as with all things shop around.

You may find the likes of Chris Mills and southside etc might stock it a little cheaper than the riceboy tuners.

Link to comment
https://www.sau.com.au/forums/topic/5821-fluid-changes-specs/#findComment-91764
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
×
×
  • Create New...