Jump to content
SAU Community

Recommended Posts

I'm just wondering who's out there with a 20 putting out this kind of power. I've seen them every now and again, but it would be nice to have a collection in the same thread.

If you do... post up and let us know your spec list! If you are in the mid 200+rwkw range... go ahead and post up as well. If you have a dyno graph... please post it since it would be nice to see how these mods affect the power band.

No slicks (some 17 inch tyres which cost me 10 bucks each) 2.0 60 foot

Was just a hi flow vg30 turbo (v trim), fmic, gtr fuel pump, and mines map ecu and a bit of boost around 1 bar.

Was dynoed at around 290 but probably had a little more on the night 310-320 rwhp that is

i got 333 HP @ wheels ..

rb20det in a 180sx

hks t04e kit

ems 8860

gtr injectors

bosch 044 fuel pump  

etc

havent run it yet , no rego sitting in my garage lol

Sounds good! Nice to see some other S13's with RB's SXC and CS... especially putting out some very respectable power! What's the powerband like with that T04E? I'd be interested to see what cams would do for you...

Sounds good!  Nice to see some other S13's with RB's

Not an rb20.. But an rb S13 none the less.

93 S13.

94 rb25 taken out to 2.6lt.

Custom twin turbo set up using 25/30's.

Plus other mods.

best time of 10.8 @ 127mph in the middle of the day in silly heat. Around 600hp @ the wheels on C16.

Pics in my gallery. Shoot me a PM, and I can scan the mag write up when I get time.

Cheers, Josh.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...