Jump to content
SAU Community

Recommended Posts

well he said when he had a quick drive it made 3psi at 6,500 rpm so its a top end screamer

as expected.

it would be quite a pig to drive with that sized turbo no matter what size engine.

I think your looking for the word "sic" not pig he's going to drag then swap to a hks 2535 for drift

well yeah, the owner must be crazy to drive something like that.

fyi, the hks gt2535 is too small for the RB24, you'd be better off with a hks gt2835r or the new garrett gt3071r.

exactly the turbo i'll be downsizing to with my 2.4 once i can find someone to tune the fcon V ecu..

my car made 220rwkw on 10psi and insanely rich afr's with the k27 but its way too laggy for a street car (full boost at 4.8k). basically useless in the hills unless your on gorge road (open mid speed corners).

:blink:

Hi guys i live up here in darwin (bloody hot) ive got a rb20det in my s13

ive got: GT25-40

550cc rx-7 injectors

microtech ltx-8

gtr fuel pump

shitty stock supra front mount

press bent intercooler piping...(dodgy)

3" exauhst with trust 4"tip

currently running on 12psi it made 209.7rwkw (indarwin and yet to be tuned)

i just blew the motor up about 1 month ago and now ive got HKS cams tomei head gasket 700X350X100 Trust FMIC and im looking for a forge kit but cant find ne thing for the rb20 should be making 250+ once i get it running properly, only prob is i cant run too much boost up here because of the heat.. :)

Also my best time at the street meet was [email protected] track temp was 34degrees on the night! on street tyres :)

Edited by RB20DET SILVIA
Hi guys i live up here in darwin (bloody hot) ive got a rb20det in my s13

ive got: GT25-40

550cc rx-7 injectors

microtech ltx-8

gtr fuel pump

shitty stock supra front mount

press bent intercooler piping...(dodgy)

3" exauhst with trust 4"tip

currently running on 12psi it made 209.7rwkw (indarwin and yet to be tuned)

i just blew the motor up about 1 month ago and now ive got HKS cams tomei head gasket 700X350X100 Trust FMIC and im looking for a forge kit but cant find ne thing for the rb20 should be making 250+ once i get it running properly, only prob is i cant run too much boost up here because of the heat.. :)

Also my best time at the street meet was [email protected] track temp was 34degrees on the night! on street tyres :)

dude,

Tomei in japan make forged pistons for the RB20DET, although to suit over-bored application, check it out;

http://www.tomei-p.co.jp/_2003web-catalogu...B20_piston.html

The GT2535 would probably quite a very nice street RB24DET.

i just feel that the turbine wheel in the gt2535 is too small for any engine that has a capacity of > 2.2L.

it would choke power up top given they run larger compressor wheels.

just my 2c

RS500,

It does no doubt choke up top end but thats exactly why I think it would be awesome for the street. Lots of mid range torque, there's nothing worse on the street than having to ring the crap out of it to zip up the inside lane or to overtake. It really depends what your used to, I'm used to big lazy v8's and old lazy 6's with lots of low and mid range torque.

Seeing how the GT2535 works on the rb25det's makes me think it would most definitely work very well with the rb24.

RS500,

It does no doubt choke up top end but thats exactly why I think it would be awesome for the street. Lots of mid range torque, there's nothing worse on the street than having to ring the crap out of it to zip up the inside lane or to overtake. It really depends what your used to, I'm used to big lazy v8's and old lazy 6's with lots of low and mid range torque.

Seeing how the GT2535 works on the rb25det's makes me think it would most definitely work very well with the rb24.

you make a good point cubes, although by running a turbo like the garrett gt3071R, the larger turbine wheel will bring the smaller comp wheel into efficiency earlier without the lag experienced with a turbo like the HKS GT2540 for example.

less back pressure in the exhaust housing would allow the turbine to come onto boost earlier than normal inturn producing more mid range torque, plus the fact that it doesn't have to spin up a massive comp wheel at the front.

no love for the RB20 here (sorry again Roy).

Blitz front mount

A'PEXi pod

3" turbo back w/ hi flow cat

upgraded fuel pump

running 12psi got me a massive 138rwkw....RB25 here we come :)

arent R32 GTST and GTS4 meant to be 165 kw stock ? how can ur power be so low ?

arent R32 GTST and GTS4 meant to be 165 kw stock ? how can ur power be so low ?

165 at the flywheel, about 110-120 at the wheels so hes doing better then stock. The old redtops rated at 140 only made 95-100atw in stock form, slower then a rb30e.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...