Jump to content
SAU Community

Recommended Posts

Hi everyone,

I've been a SAU forum junkie for a while know, and would like your opinions on an alright first car, cause I know you guys are *generally* free of the usual car bs. :)

I've read the other recent topic on this, and totally agree that a R33 GTR might be a dreamed of car, but certainly isnt the way to go while still on P's and an inexperienced driver. I'm after a NA car, with body shape and interior most important. I'd prefer something a little bit unique, so no pulsars, falcons or barinas.... i might consider a lancer.

Must be a manual, as I've been driving the parents' 323 auto since getting my license.

Cars that I've researched and considered myself, all below my absolute limit of 13k are:

- Honda CRX

eg: Example

- Hyundai Coupe

eg: Example

- Mitsubishi Eclipse

I know they're very rare here in aus, but still considered

- Some type of Silvia S13

Any thoughts or suggestions welcome

- Rhys

Link to comment
https://www.sau.com.au/forums/topic/58404-suggestions-for-a-decent-sub-13k-car/
Share on other sites

i dont know about others but i loved my N14 SSS pulsar 2L front wheel drive so it had a good amount of power and was a great car to build up confidence and driver skills. you can get a decent aus spec one for like $7000 and a good jap spec for like $9,500 or so great car really reliable as well plus good fuel econemy. anyways just some food for thought :)

Don't go for a Hyundai. Most of them aren't too reliable and the build quality isn't to be desired. Honda parts are expensive. Mitsubishi Eclipse you probrably wouldn't find here and if you did I'd steer clear unless you're made of money. Finding spare parts would be a complete hassle. Non turbo S13's are a decent choice, but as mentioned the insurance costs are horrble. Personally I'd say go with something like a Nissan Pulsar or Mazda 323 or Mitsubishi Lancer. They're common, but this is a good thing. These cars are quite easily insurable, safe, and unless you buy a lemon theyre reliable too. I regret not taking this path myself as it's a great way to build up your insurance NCB so that you can insure whatever car you like without paying a fortune later in life. When deciding, I reccomend you get insurance quotes on each of the cars you're considering, also look around at part costs for most common items which are required for maintenance.

I am with Leech, I think the SSS is a great car. Enough power, a Nissan and can be made to look pretty good. Wouldn't be too hard to find one that has had an easy life as a grocery getter either. The 2L versus all of these 1.5s you have mentioned would be enough to make my mind up.

bought my ae86 for $650 :( you can spend the extra 12k on mods :)

Failing that import a 1989 R32 GTS (N/a), you can get one for about 10k on the road with no more work necessary with pocket change.

n/a rx-7 80's.Not piston i know but.Meh.And not new but neither is the bluebird or r31.A bridgeport with webbers extractors exhaust filter manual decent paint job for cheap price a fun car to drive when you want it to be.

Pretty shit on the body though ie.Kits.But a well painted 1 with chromies looks good.

bought my ae86 for $650 :P you can spend the extra 12k on mods :P

Failing that import a 1989 R32 GTS (N/a), you can get one for about 10k on the road with no more work necessary with pocket change.

I got my '89 GTST with Tein HA suspension, 3" exhaust, chipped, HICAS lock and stereo, for around 12K on road (10.5K car, 800 new engine, 300 stamp duty, 600 insure).

Paint's a bit rough, but there's no "damage", so surely a GTS is easy sub-10K else sounds a bit steep to me, but if people are paying it...

Edit: That wasn't imported, bought locally here in Melb, so with RWC it's stacks less hassle than importing. And you actually get to test-drive it yourself.

Whoa, thanks for all the input!

The S13 has been factored in now, and possibly the SSS, but im wary of a 80s skyline - most likely been thrashed sometime, and would end up being expensive to maintain. :)

I also saw a Eunos 30X recently, and it seemed alright, although a bit small for someone as tall as me (193 cm). If i could get the leather interior optioned model, i'd consider it.

Hmmm, its going to take more thought

-Rhys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...