Dyno Days R Us???

[adam 32]

Adam.. if you DO beat me, and we've all see how you drive..ha ha  

can you teach me how to drive shannon? maybe with years of practice i can pull off a 'sick' burnout at the motorplex

[rev210]

Originally posted by osc@r

Firstly...

Rev210...  lol  I almost forgot about that.. we got chewed out by that cop good and proper huh..  well we were doing just a tad over the limit.

I'm thinking the reading is a bit high, as a month or two earlier, same mods except 14 psi, i got 219 at Fuel Inj Services, in Belmont.    who knows..?

Yes, we did get an ear bashing. What was he talking about anyway?

219rwhp sounds about right for the car, you don't need much to go quick in the s13's and thats enough power to run 13s easy in your car.

[summoner]

Guys, its simple really. If you want feel good #'s so you think you have a big HP monster, go to Myaree Dyno, if you want the most accurate # you can really get go to Genie(because u can only turn a 3 ton concrete roller so fast). If you want good basis # that you can compare with pretty much rest of australia(which id a Dyno Dynamic dyno #) then go to PSi or Formaz... and both have a 4wd dyno. Or if you want something special go to Speedworks for the Dynapack dyno(but involves taking rims off and lotsa work etc)

[osc@r]

ha ha ha.. Adam.. it takes years of practice to do a burnout like that. Couldn't you tell.. next time I might even get some smoke peeling off. :burnout:

[osc@r]

Originally posted by osc@r

I only went to Myaree cause i wanted a print out with an a/r ratio printed on it

Fuel Inj Serv couldn't do it.. [/b]

oops.. I meant an "A/F ratio".

[summoner]

Originally posted by osc@r

oops..   I meant an "A/F ratio".

why not genie/formaz/psi/chiptorque/any dyno place has a AFR sniffer can do u a afr reading

u just wanted a pretty HP reading didnt u

[Butters]

SST Anyone ??

They looked after the Silvia WA guys.

I went to a dyno day at PSI and they boosted my car WITHOUT asking me. They boosted it no less with a t piece tube. Then to add insult to injury left the t-piece on my car WITHOUT telling me. I drove off and the car was overboosting. Pulled up and discovered the T-Piece.

Go to PSI if you guys want but it is at your own perril ........

SST dyno reads the same as PSI anyhow .... REAL FIGURES.

Oh and another thing, we almost died watchin the dyno runs at PSI. PSI has no extractor fan and the workshop filled with exhaust fumes. Cough Cough

The screen was excellent though. Were ever u go, orginise that !!

[Nexus_SiX]

Originally posted by Butters

Oh and another thing, we almost died watchin the dyno runs at PSI. PSI has no extractor fan and the workshop filled with exhaust fumes.  Cough Cough  

should be HAD no fan.

It was pretty bad though. Not only is it well ventilated now, but they have actually moved to diff location. And newer Dyno.. (as mentioned)

[welke]

Im with butters.

A big screen could be easily organized where ever we go, if thats the main attraction.

SST are offering a dam good deal fellas.

[Pva_Glue]

What the hell is happening this thred?!?!

I didnt know how much trouble to choose which dyno go to...

well I leave decision to you guys, I am not touching this with 10 feet pole!:eek1: :confused: :fro: :rave: :Owned: :bahaha:

cheers

Joe

[adam 32]

sst sounds good to me

someone setup a poll for which dyno we go to!

PSI

SST

Speedworks

Formaz

Myaree

[skyzerr33]

no someone pick a place and organise it and then post the details

this getting past being a joke.

[Adam 33]

well where ever we go ill go

even tho my car is stock as ill give it a run to see what it gets.

:uh-huh: :burnout:

[osc@r]

Summoner.. i actually went to Myaree cause it was the only one that i could book at an hours notice, was cheap (50 bucks for three runs).. and he printed the A/F ratio on the dyno sheet, so i could see that i wasn't leaning out too much in the top end.

I needed to know the a/f before i took it down to the Plex that night and thrashed the hell out of it.

but.... that said, to anyone who didn't know better, it does bring a smile to ya face.

[Butters]

PVA Glue - Sorry dude, didn't mean to Hijack thread ..

[rob77]

Ok, troy has said to organise it so I will. I say speedworks, probably some Sunday in December (as I wont be here in january). Anyone? Anyone? The deal is $30/car unless we can get 25+ cars then its $25/car.

Rob

[skyzerr33]

righto

Rob u call and organise for a mid december weekend day at speedworks.

post a new thread in events when u have all your details and we'll start taking names.

if you say your in and forget to show without a valid reason poor form and it makes it alot harder for us to sort these things in the future as a poor turn out, after much hype from the guy organising it can get the tune shops off side.

also we can organise another in late janurary as that date sounds like it suited the other two shops anyway.

settled after rob has details posted i'm closing this thread.

[RadiuM]

please dont make it the dec8th weekend..

Tour De Max is on. :-)

Shaun

[skyzerr33]

Rob try for the weekend of 14th and 15th of December.

[Guest GR33DyMANGO]

Originally posted by RadiuM

please dont make it the dec8th weekend..

Tour De Max is on. :-)

Shaun

is tour de max that mad cycling event in europe where they have insane stacks down cliffs?

or is it one of those 24hr car races?