Jump to content
SAU Community

Recommended Posts

ok i'm tossing up between the r33 and r32, did some research on the r33's, now for the r32's, i was wondering what kinda power figures and quarter mile times a lightly modded r32 is capable of?

mods would include, pod, front mount, full exhaust, and a tune, and boosted on the standard turbo, a few ppl have been telling me that the rb20's in standard trim dont have much torque, would this kinda of set up help much with the torque issue? cause i like my cars with some torque and if the r32's dont fill my needs then i'll just spend a bit more and get the r33, will be waiting for ur advice guys, thanks

Link to comment
https://www.sau.com.au/forums/topic/59283-info-on-lightly-modded-r32s/
Share on other sites

RB20's have no torque (compared with a RB25). I went with a R32 because it looks better.

Generally speaking Skylines are very robust performance cars, I guess the thing to look out for it the condition of the car (seats, carpet, steering wheel, how the gearbox feels, how dirty the motor is, how it sounds, window and door seals etc...)

yeah,i know an importer that would sell an r32 gtst w pod,hks ssqv,coilovers,r33 gtR buckets,75000ks...the one with the sunroof,also got a veilside front bar, new midnight blue paintjob and r32 gtr rims for 13,you know,for that price,youd save alot off the r33s price already,spend the difference,unless alot of bodywork done,r33s jus commodore anyway

everyone knows an importer or a friend of a friend who sells R32 for that price, but the reality is that there are costs involved in getting a car complied and on the road...

For a decent R32, you are looking at spending at least 15k.

nemz: don't mean to offend - this may be a bargain R32, but I have just seen so many similar posts - but have never seen a decent R32 for under 15.

Things to look out for: check windows, check wheel arches for rust, service history, interior condition, rubber in wheel arches (burnouts)...

Have a full mechanical insspection done including compression test!

they are 89 models though,the only problem i had was stock bov leaking boost back through plumbback,got a new one and its running fine,i really diddnt know i could get such a good example for 11,3,gave me a kakimoto exhaust 3" all the way,even had coloured drink holders lol

When i first got my R32 i did some basic mods(ehxaust, intercooler, boost and tune) which it made 190 rwkw, and ran 12.9 @117 mph on street 17" tyres. The mods didnt cost much at all ( around $1500) and left me with a close to stock 12 sec street car.

well either way dude,im not here to criticise you,nor you me,its beside the point,im sure there are alot of rip offs out there,maby the clock was wound back,but its still got original timing belt,the water pump dosent need changing,lets say it did ....whats an average for aussie conditions...18oooks a year x 15 years,thats 220,000 ks or so,what turbo engine would be running perfect after that? and if it has done over 150ooo ks im happy its running the way it is,for 11000 youd expect things to stuff up,ive had it for a year now and the only problem was that bov.

i've been looking around and its true that r32's in decent nick are really hard to find for under 15g, i've been looking at both the r32 and 33 and the r33 only seems to be a few more grand, not that much difference

on another note, about the km's issue, if its got an aftermarket speedo with the 180km plus speedo, this wouldnt be the correct km's reading right? it would be the reading from when the new speedo was put it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...