Jump to content
SAU Community

Recommended Posts

ok i'm tossing up between the r33 and r32, did some research on the r33's, now for the r32's, i was wondering what kinda power figures and quarter mile times a lightly modded r32 is capable of?

mods would include, pod, front mount, full exhaust, and a tune, and boosted on the standard turbo, a few ppl have been telling me that the rb20's in standard trim dont have much torque, would this kinda of set up help much with the torque issue? cause i like my cars with some torque and if the r32's dont fill my needs then i'll just spend a bit more and get the r33, will be waiting for ur advice guys, thanks

Link to comment
https://www.sau.com.au/forums/topic/59283-info-on-lightly-modded-r32s/
Share on other sites

RB20's have no torque (compared with a RB25). I went with a R32 because it looks better.

Generally speaking Skylines are very robust performance cars, I guess the thing to look out for it the condition of the car (seats, carpet, steering wheel, how the gearbox feels, how dirty the motor is, how it sounds, window and door seals etc...)

yeah,i know an importer that would sell an r32 gtst w pod,hks ssqv,coilovers,r33 gtR buckets,75000ks...the one with the sunroof,also got a veilside front bar, new midnight blue paintjob and r32 gtr rims for 13,you know,for that price,youd save alot off the r33s price already,spend the difference,unless alot of bodywork done,r33s jus commodore anyway

everyone knows an importer or a friend of a friend who sells R32 for that price, but the reality is that there are costs involved in getting a car complied and on the road...

For a decent R32, you are looking at spending at least 15k.

nemz: don't mean to offend - this may be a bargain R32, but I have just seen so many similar posts - but have never seen a decent R32 for under 15.

Things to look out for: check windows, check wheel arches for rust, service history, interior condition, rubber in wheel arches (burnouts)...

Have a full mechanical insspection done including compression test!

they are 89 models though,the only problem i had was stock bov leaking boost back through plumbback,got a new one and its running fine,i really diddnt know i could get such a good example for 11,3,gave me a kakimoto exhaust 3" all the way,even had coloured drink holders lol

When i first got my R32 i did some basic mods(ehxaust, intercooler, boost and tune) which it made 190 rwkw, and ran 12.9 @117 mph on street 17" tyres. The mods didnt cost much at all ( around $1500) and left me with a close to stock 12 sec street car.

well either way dude,im not here to criticise you,nor you me,its beside the point,im sure there are alot of rip offs out there,maby the clock was wound back,but its still got original timing belt,the water pump dosent need changing,lets say it did ....whats an average for aussie conditions...18oooks a year x 15 years,thats 220,000 ks or so,what turbo engine would be running perfect after that? and if it has done over 150ooo ks im happy its running the way it is,for 11000 youd expect things to stuff up,ive had it for a year now and the only problem was that bov.

i've been looking around and its true that r32's in decent nick are really hard to find for under 15g, i've been looking at both the r32 and 33 and the r33 only seems to be a few more grand, not that much difference

on another note, about the km's issue, if its got an aftermarket speedo with the 180km plus speedo, this wouldnt be the correct km's reading right? it would be the reading from when the new speedo was put it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSP male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSP reducing bush?
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
×
×
  • Create New...