Jump to content
SAU Community

Recommended Posts

Hi Guys

My mate has just landed a few thousand hybrid intercoolers.

600mm x 300mm x 76mm and the

450mm x 300mm x 76mm.

These coolers are from the hybrid factory so they are exactly the same design as the original hybrid coolers. The specs you see on those intercooler also applies here..

while stocks last I have the limited edition version - sold out

Here are the specs

Attrictive polished aluminum look

3" inlet and 3" outlet pipes for high flow

Low pressure drop 0.2psi at 15psi of boost

80 psi for up to 800 horses

Made by lightweight but strong material. Same Structure and material used as famous "Hibrid" Intercooler. Weight ~8kg

All coolers have been Pressure tested.

15 bars core design. For more efficient air flow over the older 16 bar design.

2 sizes

Size: 600mm x 300mm x 76mm

up to 5 buyer: $330

5 to 10: $300

10+: $295

Size: 450mm x 300mm x 76mm

NEW PRICES

up to 5 buyer: $325

5 to 10: $295

10+: $290

postage: ~$25 to the east side of australia and $30 to the west.

As seen in the picture the cardboard box has polystyrene strips to protect the fins from transport damage. The cardboard box is even double up in places for extra strength.

Payment must be by Direct Deposit.

Local Pickup is available. Save postage

If you have doubt about buying from this group buy do a search for other groups buys with my name. Im sure you will find out quickly Im an honest bloke . Also if for some rare reason I can't get the parts and you have already transferred money to my account your money will be transfered back to your account straight away!!

Piping will be available soon for this intercooler. Still don't know the ETA of when the pipes will arrive in Australia.

Link to comment
https://www.sau.com.au/forums/topic/60147-hybrid-intercoolers-group-buy-no-2/
Share on other sites

while stocks last I have the limited edition version

????????

what do u mean limited edition

Well on the Tag it has "Hybrid super intercooler limited edition". I will post up a picture tomorrow.

Now I know you want to know what is good about these coolers compared to the normal hybrid coolers. Well That question still needs to be answered - I dont know. I think it is suppose to have better cooling properties but I'm not sure.

ok , im in for 1 of these , however , some stuff needs to be clear up here for every 1

- this is a group buy, with different amounts according to how many buyers. if i pay today for XXX amount and then 25 other people buy them , then what price will i be paying. As you posted above , derlivery is same day or 2- 3 days .... how does that work ?

- is there an end date?

- why is the pic of the hybrid plate , look like the cooler is second hand ?

ok , im in for 1 of these , however , some stuff needs to be clear up here for every 1  

 

- this is a group buy, with different amounts according to how many buyers. if i pay today for XXX amount and then 25 other people buy them , then what price will i be paying. As you posted above , derlivery is same day or 2- 3 days .... how does that work ?

 

- is there an end date?

- why is the pic of the hybrid plate , look like the cooler is second hand ?

Usually how I work this is like so

1) I monitor the groups buy on a daily basis. If it is slow (takes more than weeks for to get 5 people) then I notify everyone to see if they are still in. If the 5 people are still in then I will go to my suppiers place and pickup and deliver the parts. If less than five people, well people usually want to wait. Otherwise I can go down and get a cooler for the < 5 cooler price.

2) If lots of people are interested then I will just wait till 10 or greater. If there are 15, 20 buyers then I will haggle my supplier for a better price.

3) I know how people get worried with money so I try to make money hand over the last thing on the list so I can make the transfer a quick as possible.

Just got word from my supplier the coolers with the limited edition plaq are all sold out. gee that makes me mad!!!! Sorry guys. But the piping will be due in a month woohoo!!! s13 R32 R33 will post up thread

The other coolers he has are from the hybrid factory but without the plaq and hybrid badge. I will go over his place and try to find out the difference between them.

The 2 guys that have to limited edition cooler shipping to your place from the last group buy are very lucky.

not happy.

no the cooler is not second hand. It just looks like that from the flash. I would post up one without flash but it is not worth it now.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • New CAS just turned up from NZ Wiring. Looks like a nice bit of gear.  So, yeah. Triggered, bro. Realised I may as well do the cam belt while mucking about with it so will order one of them.
    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
×
×
  • Create New...