Jump to content
SAU Community

Recommended Posts

I was curious to see if anyone has subaru injectors on their RB26, RB20, or RB25 (converted to top feed injectors)?

My friend has them on his civic and work great. If you clip the tip off the injector they are 740cc injectors and you can pick them up for around $70-90 for a set (4 injectors).

I have an RB25DET, but will be buying a RB26 fuel rail to make it top feed. Then will be getting the subaru injectors. Just curious if anyone has done this before....

Link to comment
https://www.sau.com.au/forums/topic/60616-anyone-use-subaru-injectors/
Share on other sites

I'll be interested to read more on this. Good luck and keep us posted. I'm about to fit up some toyota 440cc injectors in the Rb25. High impedence so no need to use a resistor pack.

Soo what are the dimensions of the Scooby ones? What impedence? Are any other mods required to the system to accomodate them?

They are a high impedence top feed injector. I have two friends that have done this so far on their Hondas and are having great results. The easiest way of cutting the tip off of them is to get dog nail clippers with the curved blade and apply a little pressure to them while turning it around the tip, which normally will cut them off in about 2-3 360 degree turns.

The flow rate on them are all within 1% of each other and have heard no one having problems with not having equal flow rates. Just to be safe, you can send them in and get them checked for the flow rate normally for $5 per injector.

The clips are the only issue right now, but is possible to use the subaru injector clips. You can get some .110 tab and seal them with silicone and will work perfectly fine.

I'll be interested to read more on this. Good luck and keep us posted. I'm about to fit up some toyota 440cc injectors in the Rb25. High impedence so no need to use a resistor pack.

 

Soo what are the dimensions of the Scooby ones? What impedence? Are any other mods required to the system to accomodate them?

Much easier to use S15 SR20det injectors for Rb25det (not Neo)

They are 448cc some people say they are 480cc

at 448cc that is a 21% increase over standard 370cc

so they should be good for approx 270rwkw.

The sr20 and rb25 use the same injectors, so there is no need for any mod's

you Must get the Manual turbo injectors, as auto injectors are still only 370cc

Manual ones are red/orange colour part number 16600 91F00

370cc are purple colour which are also in S14

I had to buy 2 sets of 4 at $300 set

I will sell the spare 2 at $150 for 2

Then someone only needs to buy 1 more set at $300 or less

You end up with a much cheaper upgrade for about $450 set of 6

No need for resistor's or top mount fuel rails

There is a set of Subaru WRX injectors for sale on nissansilvia.com.com and the question has been asked do they fit Sr20

Answer quote "I do not think so"

http://www.nissansilvia.com/forums/index.p...topic=66615&hl=

Hope this helps

Cheers Darren, but with a GTR rail there is very little to be done to fit up top feed injectors.

I measured the impedence of the Toyo injectors at 3.1 ohms so they are low impedence....not what I was told. No biggie anyway. Little bit of simple wiring.

Whats the resistance of std Rb20/25 injectors, i cant remember what mine read, woudl i be right if i said somewhere around the 12ohms.

Which brings me to my next question, surely ECUs work within an impedence window, any idea what this may be. Say in the case of GTR ECU, perhaps handle impedences between 2.0-3.5ohm? RB20/25 ECU between 9.0-12.0ohm?!?!?!?!?!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...