Jump to content
SAU Community

Recommended Posts

  • Replies 300
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Well guys, I have just removed the Pepsi can gasket from underneath my BOV. While it was blocked off I noticed that boost came on much harder and also faster in between gear changes. I tested this on stock boost with the factory solenoid controlled by the ECU and also with the solenoid grounded running straight 7psi. On both settings there were absolutely no idle/stalling issues. I only drove about 10KM as I do not want to find out how reliable this setup is.

It sounded fulleh sik but also made the car more responsive on boost and also quicker to get there.

Is there anyone else who has run their factory RB25 S2 turbo without a BOV for a lengthy period of time who can report on reliability?

Haha I used Coke :(

Yeah the turbo will be fine, even at 10psi or higher without a BOV there would be no damage. I think people start thinking stuff in there head and panic, when theres nothing to worry about.

Are you gonna keep the fully sick setup?

Yeah i have the stall problem sometimes, do you know what it is caused from?

Ive done about 1000km

:(

Edited by r32matt

Aside from making you a hectic bro - I have found that it has made my car more responsive, keep in mind that it is a genuine low kays S2 33 gts and i am running stock boost with a blitz pod and 3" cat back otherwise standard.

lol!

Im guessing you havent read the last 14 pages :(

Putting some metal or a coke can under the BOV blocks it off from the intercooler pipe. Then you just block off the tube that runs from the manifold to the BOV and you will get Fully Sick Flutter.

If you want details or instructions just PM me :(

Edited by r32matt
Ah if u can fit it in the gap, it won't do a whole lot, the can wil probably get shaken up and will eventually de-carbonate, it won't cool it down either, your best bet is the fridge

haha i didnt understand any of that?? :(:woot::(

Ah if u can fit it in the gap, it won't do a whole lot, the can wil probably get shaken up and will eventually de-carbonate, it won't cool it down either, your best bet is the fridge

haha!! Nice

Nah he doesnt mean a full can :(

Gotta cut the can out to be the shape of the BOV. Put it in like its a seal and it will block up the hole.

The small tube which runs to the top of the BOV - Unplug that from the BOV and block it up (screw or something)

Would you like a diagram? :(

Just curious y did u block the tube off?

Just that i didn't think it would matter, it's only for pressure regulation (i think ) and as it's not getting any pressure i'd think it wouldnt make any difference whether blocked off or not. Correct me if im wrong but air only goes into the manifold nothing goes the other way right? (which i probably am not)

And na u shouldnt need to block the plumbback as it's not getting any air to it either

Edited by 123456

Nah the Plumb Back is fine, ive left all of that still on.

When I left the manifold tube unblocked my car wouldnt boost properly and was holding back, felt really bad!

Im pretty sure the tube is a vacuum which opens the BOV when you take your foot off.

What have u done with your manifold tube? did you leave yours in the BOV? I guess that would work the same if the BOV wasnt opening. Hmm might have to try, but yeah had a few boost problems with that pipe.

Edited by r32matt

Yeh i just left mine on BOV,

Only reason im asking is coz im lazy and if i decide im sick of flutterz i want it to be easy to switch back

"Im pretty sure the tube is a vacuum which opens the BOV when you take your foot off"

Yeh thats what i meant, wasn't thinking of what i was typing lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Took it to all Japan day, flogged the hell out of it and took it all, am a very very happy man  don’t know how that ended up in Greg’s thread before
    • Hey Nismo, any chance in the world you still have these seats?
    • I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
    • Are you sure the gasket is blown? What are the issues? Thermocure is the only flush I've seen do anything with rust, very impressed with that, Prestone, rust will be by the pool having a cigarette.  
    • And since the flush you have a blown head gasket? Have you lifted the head off yet?
×
×
  • Create New...