Jump to content
SAU Community

Recommended Posts

How's that? What do you do and what tells you the fault(s)? Is there a link to this' date=' or is this 'common' knowledge that the total lack of anything mechanical stored in my head has neglected me to be aware of?

[b']Auto Transmission Diagnostics[/b]


Enter the auto transmission diagnostics mode

Have the car at normal temperature in Park with the overdrive on

Start the engine the power light will go out after 2 seconds

Turn the ignition off

Move the selector to Drive (you may have to use the push button release)

Overdrive off

Wait 2 seconds, and turn the ignition on

Wait 2 seconds and move the selector to 2

Overdrive on

Move the selector to 1

Overdrive Off

Press the accelerator fully and release

Auto transmission diagnostics codes

The error codes are flashed out using the Power light on the dashboard (R32) or the Power /

Snow button (R33). The sequence starts with one long flash. If everything is OK, this will be

followed by ten short flashes.

Errors are indicated by a long flash in the sequence of short flashes.

1st flash longer Revolution sensor shorted or disconnected

2nd flash longer Speed sensor shorted or disconnected

3rd flash longer Throttle sensor shorted or disconnected

4th flash longer Shift solenoid A shorted or disconnected

5th flash longer Shift solenoid B shorted or disconnected

6th flash longer Overrun clutch solenoid shorted or disconnected

7th flash longer Lockup solenoid shorted or disconnected

8th flash longer Fluid temperature sensor is disconnected or the control

unit power source is damaged

9th flash longer Engine revolution sensor shorted or disconnected

10th flash longer Line pressure solenoid shorted or disconnected

All flashes the

same with no

long start flash

Battery voltage low, has been recently disconnected or

control unit has just been reconnected

:headspin:

  • 2 years later...
  • 9 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...