Jump to content
SAU Community

Recommended Posts

Thanks all for your help, i've called Gavin and spoke to him. Seems like he's got a good handle on things.

Next question (probably in the wrong thread) but wondering who runs / organises a Nissan club to do track days, etc? is it SAU?

If so, wondering the classes that cars are categorised in for points purposes.

Thanks,

Ben

Advanced Performance Centre (Nick) in Underwood does good work. One of the rare mechanicas that can actually use the Dyno. DO NOT TRUST SUBZERO bunch of amatuers. Almost wrecked my car.

sub-zero did a perfect job on my 32.i dont know of any ametuers that can make 780 rear wheel horsepower & theyve made alot more tha that on other cars.i couldnt recomend any one better i live five hours drive from the gold coast.but their workmanship is well worth the drive :kick:

My experience has been that it’s easy to put the biggest of everything on a car to get the max HP for one or two runs. Long term reliability, usability on the track and getting the perfect tune up is another matter (butcher vs. surgeon). I'm glad they did a good job on yours because mine was a 5week disaster that was just pathetic. Had it not been re-tuned (basically as soon as I got it back) they would have destroyed the engine. Anyway it may have been a one off but I doubt it.

Lets not turn this into a SubZero slagfest eh people...

If you wish to badmouth a workshop, try and make it fictional sounding... (IE A fictional company called BelowZero are the worst workshop in QLD IMO)

Keeps the legal eagles happy that way...

Thanks people...

  • 2 months later...

A workshop called below 0 has a very bad reputation and I know personally i'd never take my car there....having said that there are many other ghey workshops around...Many ppl on here will suggest Gavin Woods, however my personal vote will go to mecury (even though ive not had any personal work done by them.....yet)

i'll third that, gavin's the only place worth taking it to, the rest are up to shit...

gavin might be ok, but i dunno about the rest being "up to 5hit." There are a few other places that are as good in my books.

gavin might be ok, but i dunno about the rest being "up to 5hit." There are a few other places that are as good in my books.

I agree..... I have no problem recommending Gavin for all service requirements, 5000k services and major services but thats as far as I would go...... Modifying, and tuning there are certainly other alternatives. For that my cars go to Chapmans. He has a bad attitude/is arrogant, jobs always takes longer than he says, a lot longer, but has ALWAYS completed everything asked to the highest standard on my cars and my friends cars. And he isn't cheap...... but I think it ends up cheaper in the long run. Just my experience.....

Where workshops are concerned there will always be differing opinions as we all expect different things or place greater emphasis on certain areas of workmanship.....

Just when you find a good workshop, stick with them. They are far and few between.

:rofl:

*Lame-zero* did a perfect job on my 32.i dont know of any ametuers that can make 780 rear wheel horsepower & theyve made alot more tha that on other cars.i couldnt recomend any one better i live five hours drive from the gold coast.but their workmanship is well worth the drive :kick:

If Lame-zero* aren’t a bunch of amateurs, why was I sold a stolen motor? Which then followed on being impounded by the Police for months. Why did Police have to remove one of the lame-zero owners from jamboree after making threats too me? Why was the shop front wrecked? Why did the owner of TRY09’s leave? Why is the owners known quite well by gold coast Police for other things not too do with cars..

The list goes on.

I know your car, and its awesome, Lame-Zero’s custom work is up the top! But they build NOS feed cars to pull numbers and run times with no reliability. They are dodgy and take short cuts unless your spending $30k+ on something mind blowing, which will blow up soon enough anyway. Not too mention stolen items again..

……………..

Ben Shapiro

I’ve used APC for dyno tune work, and was pretty happy. I’ve been to mercury and will be back. I’ve used Charlys motors for an auto to manual conversion and would use them again. I’ve also heard Chapman’s isn’t too bad.

Your best bet would be to meet these work shops, have a chat, go from there.

Chapman & Chapman in Brisbane and Gavin Wood at the Gold Coast are the only people I would trust with any high performance import if you want the work done to the highest possible standard.

Just expect to pay about double or triple what your local commonwhore mechanic up the street

would charge. And expect about 10x better quality work.

If Lame-zero* aren’t a bunch of amateurs, why was I sold a stolen motor? Which then followed on being impounded by the Police for months. Why did Police have to remove one of the lame-zero owners from jamboree after making threats too me? Why was the shop front wrecked? Why did the owner of TRY09’s leave? Why is the owners known quite well by gold coast Police for other things not too do with cars..

The list goes on.

I know your car, and its awesome, Lame-Zero’s custom work is up the top! But they build NOS feed cars to pull numbers and run times with no reliability. They are dodgy and take short cuts unless your spending $30k+ on something mind blowing, which will blow up soon enough anyway. Not too mention stolen items again..

……………..

Ben Shapiro

I’ve used APC for dyno tune work, and was pretty happy. I’ve been to mercury and will be back. I’ve used Charlys motors for an auto to manual conversion and would use them again. I’ve also heard Chapman’s isn’t too bad.

Your best bet would be to meet these work shops, have a chat, go from there.

:cheers:

have to agree with you 100%

i were in there asking questions and he was trying to sell a 100 hp nos kit to a nobrainer vs commodore owner.

he stated that he would never have to think about any better internals and if he could afford it he could run it all day every day.

the commodore owner piped up and said hed spoken to other shops saying that he should have it chipped better internals and all the rest .

the sub guy just said "piss off what a load of shit"

i then left with no word apart from sniggling at the conversation.

also said the more nos he used the better price hed give to him ;)

:bs!:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...