Jump to content
SAU Community

Recommended Posts

I have 2 cooler left from this group buy. Be quick!. If you live in brisbane $250 bargain!

Cooler have arrived and ready for delivery

Found a new supplier he has the hybrid 600x300x76 coolers a little cheaper if I buy in bulk. He is also in china so it will take ~25 days to get it to your door.

To make the deal I will need a minumum of 10 people. Also with the people who want a cooler I will need a deposit of 30% = $100. But I will not need this money until I have 10 confirmed buyers. Then the other $190 will need to be sent to me before I ship them off to you guys.

People interested.....................................amount paid(full/deposit)

1) rmahnovetsky

2) gatty might be interested

3) RedBaron Interested!

4) mr_rbman Interested...........................full posted

5) shif_tea definitely.................................full posted

6) Al definite.

7) Jetdat 1 maybe two

8) jetdat

9) shogun..................................................deposit

10) boj01

11) tikki169 ..............................................full

12) gtrGhosTDoGG11 interested

13) sky30

14) mr.r33.................................................full picked up

15) JeeTeeEss25Tee.................................full

16)

17)

18)

19)

20)

Still have a few cooler left PM me if your interested

Specifications

bar and plate design, exactly the same as hybrids without the logo.

core size: 600mm*300mm*76mm

overall size: 780mm*300mm*76mm

compressed air flow rate::P

Link to comment
https://www.sau.com.au/forums/topic/61546-intercooler-290-delivered/
Share on other sites

  • Replies 111
  • Created
  • Last Reply

Top Posters In This Topic

hey mate, i mgiht be interested - i'll get back to you

//on a side note, i see your running a site form free bigpond hosting - if you want some proffessional hosting PM me, I host a few sites including sauqld.com and a few other sites form here :P

im interested wen does this group buy close??

As soon as I get 10 people well maybe.... At this rate it will be the next hour :P ... Seriously as soon as I can get enough people (10 people). But at the rate of interests I should get plenty of takers by the end of the week. So right now I will put a due date by the end of next week. 21 / 1 /04. More people get a good deal the better :)

Group buy finish 21 / 1 / 04

RedBaron: better pricing if we can get 50+ ...

srt : No way dude. But I'm working on getting cheaper piping. If you can get an intercooler and the piping kit for under $800 let me know asap.

if its the exact same one as in the pic with the moulded outlets into the end tanks and the 4 round bits to hold it to the chassis i will take it otherwise i'm a no!

yes exactly the same as the pictures. So I guess you in. Sweet.

Have a look in you nearest autobahn they sell the same coolers.. Bar and plate coolers that retails for around $599 and that is the one. :cheers:

It is bar and plate - the cooler it made in the same factory as the hybrid brand. I asked if I could get a hybrid logo but I need to purchase min 100pcs.

I can get a close shot. I will post it up.

Just as a little incentive. I know some of you don't trust shipping from overseas etc. So since I trust the guy I will put the full risk on me :rofl:. Which means if the goods don't come through then you get your deposit back.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...