Jump to content
SAU Community

Recommended Posts

I have 2 cooler left from this group buy. Be quick!. If you live in brisbane $250 bargain!

Cooler have arrived and ready for delivery

Found a new supplier he has the hybrid 600x300x76 coolers a little cheaper if I buy in bulk. He is also in china so it will take ~25 days to get it to your door.

To make the deal I will need a minumum of 10 people. Also with the people who want a cooler I will need a deposit of 30% = $100. But I will not need this money until I have 10 confirmed buyers. Then the other $190 will need to be sent to me before I ship them off to you guys.

People interested.....................................amount paid(full/deposit)

1) rmahnovetsky

2) gatty might be interested

3) RedBaron Interested!

4) mr_rbman Interested...........................full posted

5) shif_tea definitely.................................full posted

6) Al definite.

7) Jetdat 1 maybe two

8) jetdat

9) shogun..................................................deposit

10) boj01

11) tikki169 ..............................................full

12) gtrGhosTDoGG11 interested

13) sky30

14) mr.r33.................................................full picked up

15) JeeTeeEss25Tee.................................full

16)

17)

18)

19)

20)

Still have a few cooler left PM me if your interested

Specifications

bar and plate design, exactly the same as hybrids without the logo.

core size: 600mm*300mm*76mm

overall size: 780mm*300mm*76mm

compressed air flow rate::P

Link to comment
https://www.sau.com.au/forums/topic/61546-intercooler-290-delivered/
Share on other sites

  • Replies 111
  • Created
  • Last Reply

Top Posters In This Topic

hey mate, i mgiht be interested - i'll get back to you

//on a side note, i see your running a site form free bigpond hosting - if you want some proffessional hosting PM me, I host a few sites including sauqld.com and a few other sites form here :P

im interested wen does this group buy close??

As soon as I get 10 people well maybe.... At this rate it will be the next hour :P ... Seriously as soon as I can get enough people (10 people). But at the rate of interests I should get plenty of takers by the end of the week. So right now I will put a due date by the end of next week. 21 / 1 /04. More people get a good deal the better :)

Group buy finish 21 / 1 / 04

RedBaron: better pricing if we can get 50+ ...

srt : No way dude. But I'm working on getting cheaper piping. If you can get an intercooler and the piping kit for under $800 let me know asap.

if its the exact same one as in the pic with the moulded outlets into the end tanks and the 4 round bits to hold it to the chassis i will take it otherwise i'm a no!

yes exactly the same as the pictures. So I guess you in. Sweet.

Have a look in you nearest autobahn they sell the same coolers.. Bar and plate coolers that retails for around $599 and that is the one. :cheers:

It is bar and plate - the cooler it made in the same factory as the hybrid brand. I asked if I could get a hybrid logo but I need to purchase min 100pcs.

I can get a close shot. I will post it up.

Just as a little incentive. I know some of you don't trust shipping from overseas etc. So since I trust the guy I will put the full risk on me :rofl:. Which means if the goods don't come through then you get your deposit back.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...