Jump to content
SAU Community

Recommended Posts

isnt it strange how if they see a 'New Holden' they probably wont pull him over, but if a old R32 doing the correct thing on the road is spotted, theres no second thoughts about pulling him over, the lights just go on. one of my relatives was doing a course in law were he became a cop for about 1 year and he quit it, the reason was; "Cops are so corrupted these days, they think that just because they try to enforce the law they think they can break it, theres always at least 1 out of 10 good cops, but its getting worse every year"

Burns just remember to keep it cool and dont rush ahead, you'll win this.

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

hey if you want to get off the fine you would be more likely to do so if you can say you did it because it was safer to do so than remain completely in your lane.

Say what you first brought up, thought there was an accident and slowed down and moved away from the roadside edge to take a more safe route. Then you can use the picture of the cop as it too looks like he has moved away from road edge over the centre of the lane because he's seen your father there and its the safest route because a pedestrian might step out in front.

Try and take the 'its more safer route' rather than try and dodge the issue up. Of course you wont have much chance of convincing them that you were being 'safer' if say you have a total of 11 points, in that case I would just let it slide.

Stephen

hogans ghost!!! hahaha use the alf stewart pic!!! thats so piss funny, hahaha. if the world was a perfect place, that alf stewart pic would stand up in court. get alf to come in and be the eye witness....ya flamin mongrels

as far as i know self preservation is a valid defence to any road-related offence (protecting yourself)

if you state the the road was unsafe, and that you moved across the line to protect yourself etc, and then use the evidence of a police car doing the same. (by agreeing with you that he was doing it for a "saftey" reason also gives the officer an easier way out of an embarrasing situation)

even then the court may not accept the digital photos as evidence.

also im pretty sure u can't "spring" the photos on the cops in court while they are testifying as others have previously stated

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...