Jump to content
SAU Community

Recommended Posts

I wouldn't touch the super protector at all.

A cop sees that (and they will from the next lane over) and they'll do you hard. They changed the law in regards to obstructing the number plate and it's applicable to this and the fine is up.

The spray looks like the best idea because only fixed speed cameras use the flash so no human is every going to think something is wrong. Although if you use that I think you should take the SAU sticker from your back window if you have one :)

As a matter of interest I ordered one of these photo blocker sprays a while back and never ended up receiving it. I don't know if it's cos they're dodgey, cos customs might have taken it (although I never received notification) or because I accidently sent it to next door (although they would have brought it over) :)

:)

They changed the law in regards to obstructing the number plate and it's applicable to this and the fine is up.

Really, mother f#ckers... I duno if cops would notice it. That spray seems great but only works on Flash camera's. You can still get done easily. Like flash camera should have no reason to flash during the day right?

check out pentaes web site

http://www.easyautobits.com.au/detail.php?siteid=108

They might be able to get the spray?

I had the photoblocker plates, but sold them cause they stuck out like dogs balls, I would have been pulled over the by the first cop who drove by me. I suspect this is the same product.

You're better off buying the spray. I took before and after photo's from different angles and distances and it does work.

Or you could just not speed...  We all know that speeding kills..

Yeh depending on the conditions like all things. I dont speed in public areas, meaning any 60 - 100 areas. But i will put my foot down in areas where there are no houses, no bystanders, & no oncoming cars.

My want to get the spray is simply to help me out if someday i accidentally get caught out or a dodgy speed camera trys to fine me. f#ck that I'll play it safe & get the spray. BTW I’ve never had a speeding or red light fine of any sorts.

Or you can try : http://www.neltronics.com.au/other_products.htm ;these guys are in W.A. A good mate has got one of the plate covers(bottom of page)-has had it on for 4 years and saved himself heaps of $$$'s in dumbass revenue. He has have had the Police behind him on numerous occassions,and only once was the cover noted(yes,he was asked to remove it-it got put back on that night).They ARE illegal,before you ask.Either Zoom or HPi did a review of these,and hairspray,an official "plate-blocker" spray and one other equally dodgy item:the plate cover was the only one that scored above 5% efficiency(I think it was around 93-95%!)at blocking side on image taking(not just "flash")-the whole image disappears! Your call:it's your dollars/points.And,no,I wont post pics-from "dead-on",you and everyone will see his # plate!!

I thought flashes occur in daytime also.

And yeah since it's to protect the plate against photos I would only want it to be blocking the plate on the photo.

I would never use the obscuring license plate cover - may as well just take the plate off entirely (as a cop can see both just as easily).

aparently "PhotoBlocker" the spray got no law behind aka, cops cant bust u. or can they? does anyone know more abt this?

cos from wat i head, u cant have a palate over ur number plate covering it. but a spray? that aint no plate my friend

Anything that obstructs or obscures the numberplate is illegal. No matter what state you live in.

The numberplate frames that block the plate from an angle is just asking to be be busted. Parking police will notice it when they are doing their rounds and they can write you a ticket and report you. I have used the photo blocker spray and it DOES NOT WORK. I took before and after pics with my digital camera and it was the same. I think the new numberplates (in NSW) have a coating that does not make these products effective.

correction,. the rule says hte number plate should be visible to the naked eye at anyime (if its night obv with a light on it) aka. with the place u cant. the spray well, the plate is visible to the naked eye at all times

  • 4 years later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...