Jump to content
SAU Community

Recommended Posts

I wouldn't touch the super protector at all.

A cop sees that (and they will from the next lane over) and they'll do you hard. They changed the law in regards to obstructing the number plate and it's applicable to this and the fine is up.

The spray looks like the best idea because only fixed speed cameras use the flash so no human is every going to think something is wrong. Although if you use that I think you should take the SAU sticker from your back window if you have one :)

As a matter of interest I ordered one of these photo blocker sprays a while back and never ended up receiving it. I don't know if it's cos they're dodgey, cos customs might have taken it (although I never received notification) or because I accidently sent it to next door (although they would have brought it over) :)

:)

They changed the law in regards to obstructing the number plate and it's applicable to this and the fine is up.

Really, mother f#ckers... I duno if cops would notice it. That spray seems great but only works on Flash camera's. You can still get done easily. Like flash camera should have no reason to flash during the day right?

check out pentaes web site

http://www.easyautobits.com.au/detail.php?siteid=108

They might be able to get the spray?

I had the photoblocker plates, but sold them cause they stuck out like dogs balls, I would have been pulled over the by the first cop who drove by me. I suspect this is the same product.

You're better off buying the spray. I took before and after photo's from different angles and distances and it does work.

Or you could just not speed...  We all know that speeding kills..

Yeh depending on the conditions like all things. I dont speed in public areas, meaning any 60 - 100 areas. But i will put my foot down in areas where there are no houses, no bystanders, & no oncoming cars.

My want to get the spray is simply to help me out if someday i accidentally get caught out or a dodgy speed camera trys to fine me. f#ck that I'll play it safe & get the spray. BTW I’ve never had a speeding or red light fine of any sorts.

Or you can try : http://www.neltronics.com.au/other_products.htm ;these guys are in W.A. A good mate has got one of the plate covers(bottom of page)-has had it on for 4 years and saved himself heaps of $$$'s in dumbass revenue. He has have had the Police behind him on numerous occassions,and only once was the cover noted(yes,he was asked to remove it-it got put back on that night).They ARE illegal,before you ask.Either Zoom or HPi did a review of these,and hairspray,an official "plate-blocker" spray and one other equally dodgy item:the plate cover was the only one that scored above 5% efficiency(I think it was around 93-95%!)at blocking side on image taking(not just "flash")-the whole image disappears! Your call:it's your dollars/points.And,no,I wont post pics-from "dead-on",you and everyone will see his # plate!!

I thought flashes occur in daytime also.

And yeah since it's to protect the plate against photos I would only want it to be blocking the plate on the photo.

I would never use the obscuring license plate cover - may as well just take the plate off entirely (as a cop can see both just as easily).

aparently "PhotoBlocker" the spray got no law behind aka, cops cant bust u. or can they? does anyone know more abt this?

cos from wat i head, u cant have a palate over ur number plate covering it. but a spray? that aint no plate my friend

Anything that obstructs or obscures the numberplate is illegal. No matter what state you live in.

The numberplate frames that block the plate from an angle is just asking to be be busted. Parking police will notice it when they are doing their rounds and they can write you a ticket and report you. I have used the photo blocker spray and it DOES NOT WORK. I took before and after pics with my digital camera and it was the same. I think the new numberplates (in NSW) have a coating that does not make these products effective.

correction,. the rule says hte number plate should be visible to the naked eye at anyime (if its night obv with a light on it) aka. with the place u cant. the spray well, the plate is visible to the naked eye at all times

  • 4 years later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...