Jump to content
SAU Community

Just got back from the EPA inspection!!!! Update


Recommended Posts

Ash, say since im on my nsw p's i can legally drive my car no matter where i go, because my licence allows that. just because im in vic doesnt mean my licence changes to a vic one. same goes with rego, if ur car is reg in nsw/vic then it has to obey to those laws as u answer to that state

but defects have to be cleared by that state that they are given in ;)  

oh and make sure if ur done in another state that ur state knows its cleared.

remember how i got defected at heathcote back in 03 for bald tyres? well i got it cleared at vic roads and 3 months later RTA NSW sends me a letter asking y i havent had the defect cleared yet. damn gov depts

you can get speeding fines/defects and anything in another state.

License ... limitations dont change, its the car that comes under scrutiny

Would this work? The race car is driven allot on the street and i wouldnt want an EPA  on it or else the car would never be registerd again.

I might remove my bonnet puller and just have a electronic button under the steering column to pop the bonnet.

What can do they if you dont plan to pop your bonnet?

think about it, if its broken you'll get a defect, what can they see if you dont pop it?

;) western suburbs thinking

think about it, if its broken you'll get a defect, what can they see if you dont pop it?

:)  western suburbs thinking

Ok good, now i dont have to worry about a defect for the turbo, wastegate etc . I wll just tell them the bonnet is broken :cheers:

think about it, if its broken you'll get a defect, what can they see if you dont pop it?

western suburbs thinking

LOL after my car comes back from the mechanics im changing the location of my bonnet puller and disconnecting the factory one!

Good call R31 nismoid.

And after i sell the 33 im moving 2 QLD :cheers:

Cheers

If you got away with saying your bonnet is broken i would put money on an EPA letter making you go in for a full inspection in the mail soon after.... so even if you did get around the cops, the EPA would get ya!

Its worth a go though!

They cant make you go for a full inspection without nabbing you for it in the first place.

Ie, seing you have an AVC-R and nailing you for it.

The only place you go in Vic Roads to get the canary off.

Maybe an exhaust EPA - big whoop. We;ve all been there

i totally agree with not being able to be sent to vicroads.. they cant get u for things they cant see..

the EPA exhaust test is no big deal.... but the cops can send u in for a full inspection and emissions test and they do check over the car for illegal mods, turbo, injectors, etc etc... or at least they did with mine.

okay so if my engine bay looks fairly standard but i have injectors, the epa with a full inspection can legally open up my rocker n pull out the injectors 2 see if there stock or aftermarket?.... and are oil coolers and the braided lines legal or illegal?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...