Jump to content
SAU Community

Just got back from the EPA inspection!!!! Update


Recommended Posts

Ash, say since im on my nsw p's i can legally drive my car no matter where i go, because my licence allows that. just because im in vic doesnt mean my licence changes to a vic one. same goes with rego, if ur car is reg in nsw/vic then it has to obey to those laws as u answer to that state

but defects have to be cleared by that state that they are given in ;)  

oh and make sure if ur done in another state that ur state knows its cleared.

remember how i got defected at heathcote back in 03 for bald tyres? well i got it cleared at vic roads and 3 months later RTA NSW sends me a letter asking y i havent had the defect cleared yet. damn gov depts

you can get speeding fines/defects and anything in another state.

License ... limitations dont change, its the car that comes under scrutiny

Would this work? The race car is driven allot on the street and i wouldnt want an EPA  on it or else the car would never be registerd again.

I might remove my bonnet puller and just have a electronic button under the steering column to pop the bonnet.

What can do they if you dont plan to pop your bonnet?

think about it, if its broken you'll get a defect, what can they see if you dont pop it?

;) western suburbs thinking

think about it, if its broken you'll get a defect, what can they see if you dont pop it?

:)  western suburbs thinking

Ok good, now i dont have to worry about a defect for the turbo, wastegate etc . I wll just tell them the bonnet is broken :cheers:

think about it, if its broken you'll get a defect, what can they see if you dont pop it?

western suburbs thinking

LOL after my car comes back from the mechanics im changing the location of my bonnet puller and disconnecting the factory one!

Good call R31 nismoid.

And after i sell the 33 im moving 2 QLD :cheers:

Cheers

If you got away with saying your bonnet is broken i would put money on an EPA letter making you go in for a full inspection in the mail soon after.... so even if you did get around the cops, the EPA would get ya!

Its worth a go though!

They cant make you go for a full inspection without nabbing you for it in the first place.

Ie, seing you have an AVC-R and nailing you for it.

The only place you go in Vic Roads to get the canary off.

Maybe an exhaust EPA - big whoop. We;ve all been there

i totally agree with not being able to be sent to vicroads.. they cant get u for things they cant see..

the EPA exhaust test is no big deal.... but the cops can send u in for a full inspection and emissions test and they do check over the car for illegal mods, turbo, injectors, etc etc... or at least they did with mine.

okay so if my engine bay looks fairly standard but i have injectors, the epa with a full inspection can legally open up my rocker n pull out the injectors 2 see if there stock or aftermarket?.... and are oil coolers and the braided lines legal or illegal?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...