Jump to content
SAU Community

Pushing it hard: Bubbling noise after 5500rpm ?

ix9

By ix9,
in Western Australia

 Share

Recommended Posts

bully Experienced

bully

Posted
Posted

Kym

Take some advice not yet given - it must be still under warrenty man get it back to the dealer asap as continued driving may cause more damage - it also sound similiar to how g3ns problem with a blown turbo pipe gasket started anyhow dont mess with it get the dealer to fix:uh-huh:

ix9 Grand Master

ix9

Posted
  • Author
Posted

Don't worry guys, it's going back to the dealer. mark my words...

like someone here said "it's better to ask a dumb question to a dealer than to ask for a new engine after it's blown"

Sometime this week it'll go back :D

thx for all the advice guys :(

And a sidenote: I disconnected the Blitz BOV, bought some new tubing to actuate the stocker, and bingo no stalling!

So I then hooked BOTH BOVs up... i get that nice pssshtt sounds ONLY at high RPM (when I want it anyway) and MORE power...

-Kym.

R34 Mentor

R34

Posted
Posted

Bubbling noise after 5,500 rpm could be your passengers Shi#ing themselves.

Seriously take it back to the dealer but may be worthwhile getting an independant check done by a recognised engineer first as the yard only have to fob you off for 12 weeks unless you can prove the problem was pre existing.

Engine only test may cost $50 but will either save you heaps or put your mind at ease.

Cheers

Chris

ix9 Grand Master

ix9

Posted
  • Author
Posted
Originally posted by adam 32

you must have a shitty one then

my BOV gave me an extra 20rwhp

nah nah, dont be sarcastic, what I meant was I think the Blitz is st00pid and faulty, as boost comes on harder/quieter now too...

probably was leaking... still got that bubbling noise too tho... but LESS now that both BOVs are connected.

The Blitz is on a custom pipe to the IC, so how would I go about removing/blockin it off ?

Anyone got a spare stock pipe they could lend me ?

adam 32 Grand Master

adam 32

Posted
Posted

tell the dealers about it, theyll be able to chuck on a std pipe and make sure everythings ok. considering u just bought it, and from a dealer, make sure they do EVRYTHING. becuase as soon as u start messing around with it and something breaks theyll just say, 'sorry warranty void'

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...