Jump to content
SAU Community

Recommended Posts

There are a million and one threads on this issue, so I suggest (without wanting to preach) that you search.

There are a lot of reasons HICAS can be out of whack, the most common being low on powersteering fluid (in R32s), and fitting an after market steering wheel without a) an appropriate boss or B) lining up the HICAS prongs properly.

LW.

Link to comment
https://www.sau.com.au/forums/topic/62104-hicas-light/#findComment-1172936
Share on other sites

I drove all through the dandenongs with a coupla mates' cars yesterday, no problems. On the way to work last night it came on around a long, constant, R.H. bend in the freeway. - I think it's coz of the small amount of slack that's developed in the steering, coz I had the wheel held nearly straight to turn the corner.

Series II R33 b.t.w.

P.s. - Has anyone actually grown to LIKE the creepy HICAS rear-steer when pushing-on through corners? It weirds-me-out bigtime.

Link to comment
https://www.sau.com.au/forums/topic/62104-hicas-light/#findComment-1176441
Share on other sites

  • 5 years later...

The hicas light is referring to the four wheel steering most of the time. It's telling you it's not working properly but it's working fine. The light only comes on after driving on open straight roads for a period of time. The best solution is to have the rear wheel steering disabled with a lock bar( a simple piece of round bar put in place of the hydraulic ram that steers the rear wheels) The solution will prevent crabbing and makes the car more controllable while the car is drifting. The light will continue to come on after this but just ignore it. You have to remember these cars with hicas were built for tight streets in japan so when the car is not turning regularly it thinks something is wrong.

  • Nope 1
Link to comment
https://www.sau.com.au/forums/topic/62104-hicas-light/#findComment-5593006
Share on other sites

in my R33 NA i absolutely love the hicas. It is also far more noticiable on an NA because your throttle applications are far bigger which means the hicas turns more (hicas works on steering angle, throttle position and road speed).

on my R33 turbo i dont really notice it much (probably because it feels so obvious in the NA) but i still like the feel of it. Seems to drift just fine too but then again iv got very good suspension and very good rubber.

which is the comment i often give to people who blame the hicas on them losing their shit while doing a slide and looping it- sorry mate, it wasnt the hicas, it was a combination of your shitty tyres and noob driving technique while trying to be a hero.

Link to comment
https://www.sau.com.au/forums/topic/62104-hicas-light/#findComment-5595200
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...