Jump to content
SAU Community

Recommended Posts

Hey guys,

Can you have a look a these photos for me?

Looks like it might not be a hig flow cat but i would have no idea.

The rest is 3 inch as in front/dump and cat back.

So if this isn't, i would like to get rid of the bottle neck.

Will i notice much difference?

Should be able to get one off ebay for $160 i hope.

Yibeda yibeda !

Link to comment
https://www.sau.com.au/forums/topic/62270-high-flow-cat-converter/
Share on other sites

Hi Birnie

Doesn't look like it, but very hgard to tell from the outside!! take it off and whild looking through it, hold it up to the light, if you can see the light throgh the mesh, then it may be a high flow. I put a magnaflow in mine and they usually retail for ~ $400, I got it through a mate in the trade for $150.

I'd be careful of the $160 'high flow' cats - if the are the generic type, forget it! save the money and get one that has actual flow figures provided for it.

On the issue of liberating a few ponies, when I imported my car it had a full 3.5 inch system, no cat or mufflers, this is the only way to improve exhaust flow - but not legal :cheers:

noticed a drop in performance when I fitted the legal system - also slower to come onto boost.

Hey guys,

Can you have a look a these photos for me?

Looks like it might not be a hig flow cat but i would have no idea.

The rest is 3 inch as in front/dump and cat back.

So if this isn't, i would like to get rid of the bottle neck.

Will i notice much difference?

Should be able to get one off ebay for $160 i hope.

Yibeda yibeda !

get in contact with BATMBL on the forums here, i got mine off him a while ago, cant remember how much, but was cheaper than anyone else

get in contact with BATMBL on the forums here, i got mine off him a while ago, cant remember how much, but was cheaper than anyone else

i got one (including front/dump) for my 34 from BATMBL. Have fitted or driven the car yet :P but how'd you find the car after fitting the new cat?

cheers.

i got one  (including front/dump) for my 34 from BATMBL. Have fitted or driven the car yet :P but how'd you find the car after fitting the new cat?

cheers.

i fitted his 3" front/dump also,

already had a 3" catback

it does the job, i dont really see the differences in all these cats, they all 3"

some are larger voloume. thats all

why pay $500 for 1kw difference?

A friend has a ballistic s/charged rodeo ute and has upgraded to some magic cats ( twin exhaust).

They are not fitted yet but the workshop is going to do a before and after with the old high flows first and then whack on the magic cats to see if they are all they are cracked up to be.

I will post results when its done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...