Jump to content
SAU Community

Recommended Posts

Just wondering what would be the best way to set up a car for drifting? I'm guessing things such as adjustable coilovers and front/rear strut tower bars help but what else would be the best way to set up a car for drifting for a person who accepts nothing less than the best :wassup:

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/62369-suspension-setup-drifting/
Share on other sites

Although i'm sure alot of people drift on a viscous LSD i'm told (since i've only ever used a mechanical) that the take up of the diff (ie when it's going from open to locked) is a little laggy, also the diff can heat up alot and render the viscous pack useless, so you'll have an open diff again until it cools down (so i'm told).

A good LSD is somthing like a 1.5 way (locks up easily under accelleration and half as easily under braking loads) or a 2 way (locks up just as easily under accel and braking). I dunno what a 3 way is...

There are a few other types of LSD but mechanical clutch pack type diffs are the go for drifting.

For drifting you need a 2 way, you want to start the drift without power on. So you need the diff "locked" under brakes (hand or foot). I strongly suggest adjustable stabiliser bars, you can't easily change the springs rates for more or less traction (front and rear). You need adjustability for the different conditions. Adj stabiliser bars are the easiest way to adjust the front and rear slip angles.:P

Hey gotboost, Ive been setting up my r33 for drift. I would have to agree with sydney kid about power, it would be better to learn with less than more. First thing i would be to get a 2way mechanical type lsd, i got a tomei type which is very user friendly, doesnt clunk everywhere. then a thick rear sway bar you will be able to feel a huge difference. Suspension would be my other top priority, dont just look at at jap brands koni's and other brands you can rebuild easily and are easily revalved to suit your needs. Subframe bushes are a plus if your rear end is still feeling unstable and a hicas lock kit. Strut braces if you ask me are a bit of a wank till you do all the rest first, the re4ally dont feel much different. So do things like front castor rods next and front sway bar. Tie rod ends or steering spacers are good to give you that little bit extra lock out of corners, could also get some adjustable upper control arms as skylines have double wishbone suspension so adjustable pillowball mount strut tops arent effective. How big is the wallet, roll cage, seam welded chassis, the list goes on

For drifting you need a 2 way, you want to start the drift without power on.  

i think sydkid means that ideally you want to start the drift by breaking traction through breaks/handbreak at the entry to a corner rather than breaking traction through boost at entry. this is where the 2way diff comes in as it helps do that through breaking.

B1Fanny so the diff is locked when under decelleration and locked under acceleration,giving wheelspin/traction loss,either way.

thats my understanding. eliminates that tail snap when u take your foot off the gass with the normal diff so you can continue the drift around the corner, get off the gas and down gear and continue on your merry way.

Does anyone know how good the original R32 Skyline LSD is?

Also does anyone know where you can buy adjustable swaybars for the R32?

Original LSD, forget it. Bite the bullet and get a 2 way - huge difference to predictablility and control when the back end is out.

Whiteline make adjustable sway bars.

LOCK THE HICAS - a must.

Get some castor happening, adjustable rods arent too expensive, or bushes if you are on a budget.

Good coilovers (Tein, Kei office, Tanabe, Silk Road, etc). Make sure you buy them with spring rates suited to drift for best results.

Drift button.

Pineapples and/or hardmount cradle bushes.

Good brake pads, front and rear.

You may need to replace some of the stock bushes if they are tired/worn.

Your car will handle like a weapon :D

If you are planning extended thrash sessions, consider a good oil cooler as well.

There are alot of other mods you can do, that will all help improve steering response, feedback and handling generally, be prepared to put a huge hole in the bank account if you want to do the works.

Other things that are worth the trouble, IMHO, is mission mount, strut braces, aftermarket camber and toe adjust, and rack ends.

There are a few things to consider in all, remember you dont need them all at once - personally I would start with diff and hicas lock then go from there :)

locked diffs are cheap but can stuff you up when drifting.. mid corner if you have to adjust your line the locked diff make its hard

my tip is adjustable castor (max) and about 6 deg of neg camber and some rspec front tyres) makes the change of direction very easy at high speed and thats what you want

2 way lsd will help

then practice

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Murray, hope all is good. I took your advice and put the filler first then the putty. Seems like a much better result but i noticed there are still pinholes. I even had pin holes when i initially put the putty on the body filler. Do you think it has something to do with my spreader being f*cked? I attached some images. This is the intially body filler i sanded. No putty yet  Applying putty. Final result after using wax and grease remover can see the pin holes. I just noticed as i look at the putty application it looks wavy not sure if it's supposed to be like that or because of the spreader.
    • Hey all just wanting some advice. I’ve just compression tested my RB25det and these are the following results  Cyl 1 - 135psi Cyl 2 - 135psi Cyl 3 - 120psi Cyl 4 - 140psi Cyl 5 - 130psi Cyl 6 - 125psi   do these numbers seem ok.  Thanks in advance 
    • I must say - this is how I picture all R31s!
    • Rust repairs completed, doors back on! pretty much totally back together running now. All future repairs will be fiddly wiring getting everything back up to road condition.  hasn’t  taken that long considering the condition I got the sub. note my helpers keeping the back seat warm 😂
    • SAU NSW Old Pac Cruise to Newcastle All Japan Day 2025 Sunday 27th July 2025 5:00AM Meeting Berowra Station Commuter Car Park 2 5:15AM Departure Cruise Via Old Pacific Hwy 7:45AM Arrival to Lambton Pool (Regroup) 8:00AM Arrival to Newcastle All Japan Day 2025 Meet Location: Berowra Station Commuter Car Park 2 Stop 1: Lambton Pool (Carpark) Final Destination: McDonald Jones Stadium for Newcastle All Japan Day 2025 Tickets: Newcastle All Japan Day 2025 $20 Per Car Spectators Free PURCHASE TICKETS HERE *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...