Jump to content
SAU Community

Recommended Posts

Just wondering what would be the best way to set up a car for drifting? I'm guessing things such as adjustable coilovers and front/rear strut tower bars help but what else would be the best way to set up a car for drifting for a person who accepts nothing less than the best :wassup:

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/62369-suspension-setup-drifting/
Share on other sites

Although i'm sure alot of people drift on a viscous LSD i'm told (since i've only ever used a mechanical) that the take up of the diff (ie when it's going from open to locked) is a little laggy, also the diff can heat up alot and render the viscous pack useless, so you'll have an open diff again until it cools down (so i'm told).

A good LSD is somthing like a 1.5 way (locks up easily under accelleration and half as easily under braking loads) or a 2 way (locks up just as easily under accel and braking). I dunno what a 3 way is...

There are a few other types of LSD but mechanical clutch pack type diffs are the go for drifting.

For drifting you need a 2 way, you want to start the drift without power on. So you need the diff "locked" under brakes (hand or foot). I strongly suggest adjustable stabiliser bars, you can't easily change the springs rates for more or less traction (front and rear). You need adjustability for the different conditions. Adj stabiliser bars are the easiest way to adjust the front and rear slip angles.:P

Hey gotboost, Ive been setting up my r33 for drift. I would have to agree with sydney kid about power, it would be better to learn with less than more. First thing i would be to get a 2way mechanical type lsd, i got a tomei type which is very user friendly, doesnt clunk everywhere. then a thick rear sway bar you will be able to feel a huge difference. Suspension would be my other top priority, dont just look at at jap brands koni's and other brands you can rebuild easily and are easily revalved to suit your needs. Subframe bushes are a plus if your rear end is still feeling unstable and a hicas lock kit. Strut braces if you ask me are a bit of a wank till you do all the rest first, the re4ally dont feel much different. So do things like front castor rods next and front sway bar. Tie rod ends or steering spacers are good to give you that little bit extra lock out of corners, could also get some adjustable upper control arms as skylines have double wishbone suspension so adjustable pillowball mount strut tops arent effective. How big is the wallet, roll cage, seam welded chassis, the list goes on

For drifting you need a 2 way, you want to start the drift without power on.  

i think sydkid means that ideally you want to start the drift by breaking traction through breaks/handbreak at the entry to a corner rather than breaking traction through boost at entry. this is where the 2way diff comes in as it helps do that through breaking.

B1Fanny so the diff is locked when under decelleration and locked under acceleration,giving wheelspin/traction loss,either way.

thats my understanding. eliminates that tail snap when u take your foot off the gass with the normal diff so you can continue the drift around the corner, get off the gas and down gear and continue on your merry way.

Does anyone know how good the original R32 Skyline LSD is?

Also does anyone know where you can buy adjustable swaybars for the R32?

Original LSD, forget it. Bite the bullet and get a 2 way - huge difference to predictablility and control when the back end is out.

Whiteline make adjustable sway bars.

LOCK THE HICAS - a must.

Get some castor happening, adjustable rods arent too expensive, or bushes if you are on a budget.

Good coilovers (Tein, Kei office, Tanabe, Silk Road, etc). Make sure you buy them with spring rates suited to drift for best results.

Drift button.

Pineapples and/or hardmount cradle bushes.

Good brake pads, front and rear.

You may need to replace some of the stock bushes if they are tired/worn.

Your car will handle like a weapon :D

If you are planning extended thrash sessions, consider a good oil cooler as well.

There are alot of other mods you can do, that will all help improve steering response, feedback and handling generally, be prepared to put a huge hole in the bank account if you want to do the works.

Other things that are worth the trouble, IMHO, is mission mount, strut braces, aftermarket camber and toe adjust, and rack ends.

There are a few things to consider in all, remember you dont need them all at once - personally I would start with diff and hicas lock then go from there :)

locked diffs are cheap but can stuff you up when drifting.. mid corner if you have to adjust your line the locked diff make its hard

my tip is adjustable castor (max) and about 6 deg of neg camber and some rspec front tyres) makes the change of direction very easy at high speed and thats what you want

2 way lsd will help

then practice

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...