Jump to content
SAU Community

Recommended Posts

I got falken ziex 265/35/18 on the rears I find then realy good in the dry but in the wet i think they are just crap i was told thay had a high temp rating and in the wet they struggle to get heat in to them thus no traction cheers.

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

if you want good rubber go and see if you can get some Re55s but they come at a cost and they a an import tyer. last i got them for was $480.. or you can do the top of the range Falken's and pay $525 for 275x18x35 for the rear...that's each by the way .. i have Falkens on the rear of mine great tyer but do not do to many burnout's ..

Falken 326 must be the most common skyline tyre out there....compliancers put them on because they are cheap and come in big sizes. They are terrible.

Falken ST115 are also appalling, which is even worse when you think they promote them as sporty.

Falken FK451 on the other hand are excellent tyres....go for em if you can get em, about $450 each.

For Re55s, they are brillian but will wear really quickly, 5-10000klm only. SAU NSW club members can get them in 17s for about 400 a corner from Gordon Leven

They are probably a little worn as well .

Any car with wide tyres at the front will tram to some extend , i got 265 's it trams too , it even trams with the stock 245's but not as much .

i just changed from some of the old Michelin pilot SX (not available now) and everyone i spoke to said Yoko C-drives were the Sh!t, and that once i used them id never use another tyre. Well thats the biggest load of crap!

unfortunately i did little research and just got the C-drives. Soon after learn that they replace the A539's, which while good, are never going to be michelin pilots!

These tyres ride super quiet, and are really comfortable, but on hard braking they lock up much easier than the pilots. Turn in and bite is far less positive, and on fast sweepers the car seems to subtly creep out and not hold the line.

Im not saying the C-drives are bad tyres, but when comparing them to a tyre such as a pilot then you see why you pay so much for the michelins.

while you can find performance tyres on a budget, the "best street tyres" will always be the most expensive each company has to offer! eg, im sure if you can foot the budget you wouldnt be disappointed with top level yoko AVS's, Pilot Sports, and Bridgestone Potenza's.

i saw someone mentioned yoko AVID S306's as good tyres! Sorry but have to disaggree! they are good if you like quiet tyres, but not if you like grippy tyres. I ran a set to about 50% then changed them for some potenza's. Bottom line, S306's are yoko's bargain "ECONOMY" passenger car tyre. Not what you want if you drive a car with some power. very easy to brake tracktion and lock up under braking.. these were on 19's, so probably exacerbated by the ultra low profile.

The latest Wheels mag tests a variety of tyres and the performance tyre which one was the Goodyear Revspec RS-02.

http://www.goodyear.com.au/passenger-tyres.htm

The Michelin Pilots came in a close second. From memory these tyres have either won or come second in every tyre test by Motor and Wheels over the last few years. Of course they cost plenty.

I wanted to try the Revspec on my Peugeot 205 GTI but they don't come in my size (195/50/15). I currently have Dunlop FM901s on my grey GTR and have to buy some new tyres to fit the R34 GTR rims I've got for the white GTR. Don't know the cost of the Goodyears yet. I'll make some calls and post the results.

Re the Kumho Ecsta's........ OK so most everyone thinks that they're sh!t but in what way ? And what version ? 711, 712 etc ?

I guess I'm asking are they OK for cruising and the ocasional belt down Putty Rd ?

Re the Kumho Ecsta's........ OK so most everyone thinks that they're sh!t but in what way ? And what version ? 711, 712 etc ?

I guess I'm asking are they OK for cruising and the ocasional belt down Putty Rd ?

well we used to run the khumo 711 on the daewoo race cars, and the 712s in one enduro as well. They were good tyres, I'm not sure of how the price compares (we were paying $250 for 205/16s) 711s about 2 sec better than the 712s around wakefield.

well we used to run the khumo 711 on the daewoo race cars, and the 712s in one enduro as well.  They were good tyres, I'm not sure of how the price compares (we were paying $250 for 205/16s)  711s about 2 sec better than the 712s around wakefield.

HOLY CRAP !! $250 for 205/16's ?!?!?! :crazy:

Is it just me or is that a lot of $'s for a little hoop ?!?!

So what would I be looking at for 255/40/17's ( I think the ones I'm looking at are Ecsta MX KU15 ) ?

At the moment I'm on Falken ZE512's that cost $250ea for 255/40/17 and $150ea for 235/45/17.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...