Jump to content
SAU Community

Recommended Posts

Hi all fellow Liners!

I just need some advise on mods for my Skyline.

I've had a guy give me a quote on a few things. Guy from Ovaboost Performance in Malaga.

Basically want to do some minor type stuff, know absolutely sweet f all about these things and really want to learn as much as I can.

What I got quoted on was:

Intercooler,

3" Dump pipe (cause it's stock from the cat back)

Manual Boost controller &

SAFC.

This according to him would get me about 250rwhp. Think it involved turning up the boost of the turbo alittle. The approximate cost was $2500, which includes fitting and tuning.

At this stage I don't want to go overboard, but maybe down the track I will change the turbo as well.

Just want to know what you guys think, recommend etc? Also I've been told it's better to have and Auto boost controller.

Cheers,

Pulp.

Link to comment
https://www.sau.com.au/forums/topic/62496-advise-on-mods/
Share on other sites

I'm currently hitting 228hp with a front/dump turbo back exhaust and an air filter. boost is standard.

front mount/safc/tune should give me more than an extra 20HP, so you'd hopefully hit 270hp. although some people have said new injectors might be needed after 270hp.

good luck.

Link to comment
https://www.sau.com.au/forums/topic/62496-advise-on-mods/#findComment-1177715
Share on other sites

where do i get an intercooler pipped and fitted for $1000 ?

i would forget the safc and put the money into a better electronic boost controller because you only have limited boost to work with on the stock turbo and you dont want to waste 2 psi as a spiking buffer .

Or just forget about boost control , youll probably hit about 10psi with a 3inch exhaust anyway and then put the money towards a powerfc which is a full replacement computer and much more programable than the safc.

Link to comment
https://www.sau.com.au/forums/topic/62496-advise-on-mods/#findComment-1178266
Share on other sites

Thanks guys!

Damn I thought that my quote was sounding good!

I hope I'm not getting ripped!I'll do some shopping for sure.

arkon, you were saying about not using the SAFC, does the electronic controller adjust to our fuel type etc too? Cause the guy was telling me that the SAFC did this. I don't know if I really want to go too much into upgrading the computer (PowerFC), just gonna do a little at this stage.

Sorry still learning all these things!

Link to comment
https://www.sau.com.au/forums/topic/62496-advise-on-mods/#findComment-1179030
Share on other sites

adjusting to our fuel type is not really required the stock ecu will do just fine on 98 octane fuel at the tune level you are looking at .

an electronic boost controller will do the same thing as the manual boost controller , ie control boost . however it does it with more accuracy and is controllable for hi and lo settings things like that .

the problem with the safc without going into to much technical stuff is it doesnt do that much so you wont find a huge gain with it now , maybe 15-20kw and later on it wont offer the level of tuning required to support more serious mods . so for the level your at the stock ecu will be fine

Link to comment
https://www.sau.com.au/forums/topic/62496-advise-on-mods/#findComment-1179277
Share on other sites

I see, now things starting to make sense!

I was told by someone the same thing about the controlling of the boost, but wasn't sure if it would be necessary. I think I'll go back and get him to give me another quote with the electronic controller. I don't want to have to go back and make changes later cause I wont be happy.

Thanks again Arkon! Great help.

Link to comment
https://www.sau.com.au/forums/topic/62496-advise-on-mods/#findComment-1179288
Share on other sites

Hi pulp,

Do you want to go faster or just have a 250rwhp dyno to brag about?

If the answer is faster;

* S-afc II is a good move. Buy one second hand for around $400 + $100 to tune.You can turb around and get most of your money back if and when you need a PFC.

* Manual bleeder boost controller. Nothing wrong with them for a factory turbo. Don't waste money on an electronic one. Aim to make good power at around 10-12psi, this is enough on the factory turbo to get you a low 13.

* Consider the front mount upgrade carefully. Pick the correct size based on your final application. If you are going to be happy with the factory turbo then reconsider getting one, it won't stop you doing low 13 quarter mile passes. As a note consider how many people can't go that quick with a front mount on the stock turbo (there are reasons why).

* exhaust improvements are a great idea. go for it.

Other things to consider...

Pineapples $100 and gets you more traction.

Adjustable exhaust cam gear. Retarding the timing on the exhaust cam nets you some earlier boost and about 10hp right through the power band. $200 DIY.

Lightweight flywheel (assuming you don't have an auto) .Along with an upgraded clutch this is worth putting in to experience increased acceleration (I gained almost half a second drop over the 1/4).

The forced induction section has plenty of good info so you don't have to reinvent the wheel.

Learn a little and you won't become a 'bolt on boy'. Instead you go faster for less effort. It's fairly easy and cheap to get low 13's out of an R33 gtst, you just need a little 'good' information. There is plenty around.

Link to comment
https://www.sau.com.au/forums/topic/62496-advise-on-mods/#findComment-1182063
Share on other sites

Hi Rev210,

Yes the faster factor is what I intend on achieving.

With the front mount option, I do intend on upgrading the turbo down the track so I think getting one installed would be the way to go.

I think it's a great idea what you said about the SAFC II and saving up for a PFC later. I think this guy quoted me $660 + $110 to tune.

Although, considering I want to put a bigger turbo in later, do you think I should get the electronic boost controller now?

I will head off to the forced induction section and have a read I think!

Thanks very much for the info mate!

Link to comment
https://www.sau.com.au/forums/topic/62496-advise-on-mods/#findComment-1182687
Share on other sites

you can import a brand new SAFCII from greenline or nengun i think it was for $450 landed in under 2 weeks.

My friend got his Power FC from Greenline for $1100 landed in less than 2 weeks so you won't need to search around for 2nd hand.

also look into getting more traction as the pineapples was mentioned. the more of that power hits these ugly bumpy streets we got here the better but you need to be able to control that power.

Link to comment
https://www.sau.com.au/forums/topic/62496-advise-on-mods/#findComment-1185412
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...