Jump to content
SAU Community

Recommended Posts

hey guys, im really interested in a few r32's on the prestige site.. but im real concerned bout the whole importing scene. For example, there's an r32 estimated for $11,500, but how much would this cost me all up after its here in syd? I mean, up until now, i thought cars under the 15yr rule didn't need compliance LOL im so confuseeeeed! I don't know if importing is a wise decision now.. any comments much appreciated. Thanks :D

Link to comment
https://www.sau.com.au/forums/topic/62838-wantin-to-import-r32-need-help-thx/
Share on other sites

Add a few grand to get it to a reasonable state......compliance will be up to about 1500......plus servicing, paint touch ups, tyres, stuff like brake pad replacement if needed and so on.

Then you have rego to pay also.......not to mention insurance. Sometimes alot easier to buy something that is already complied.

there's an r32 estimated for $11,500, but how much would this cost me all up after its here in syd?

As the website says and as RS has eluded to, after that, you'll need to allow $1400ish for the work required to make the car comply with ADR's (but not SEVS compliance, different story), then rego+CTP, say $700, then stamp duty at 3% (whatever that is, too lazy). You may need tyres. You may need engine work. You will want to have the vehicle serviced (possibly cleaned). You may also need to pay for road freight if the vehicle ships with Kiwi Car Carriers (they only deliver to Brisbane).

Add all that up. Now you have a figure which you can compare against R32's you see in the trading post. The difference (if any) will be what you are saving by taking the risk of buying a dunger and the stress/headache of messing about importing the car. If, in your opinion, you'd prefer to save the cash/be the first Australian owner/whatever, go ahead and import the car, you'll prob come out ahead. Keep in mind though, that the cheaper the vehicle (moreso the lower the median sale price of that particular model) the more savings to be had. What I'm saying is, you'll save more by importing a 1999 GTR than you would by importing an 89 S13, as the fixed costs are the same (well not exactly, but reasonably close bar import duty/GST)

The car doesn't need to be imported through a RAWS. A 15yr old car can be imported, and delivered to your house for your to muck around on, like a few blokes here are doing. If I remember rightly, a SEVS car must go to the workshop for 'real' compliance. They are two totally different things that people tend to use the same term for, which is why you feel confused.

Hope it helps.

Mark

As the website says and as RS has eluded to, after that, you'll need to allow $1400ish for the work required to make the car comply with ADR's (but not SEVS compliance, different story), then rego+CTP, say $700, then stamp duty at 3% (whatever that is, too lazy). You may need tyres. You may need engine work. You will want to have the vehicle serviced (possibly cleaned). You may also need to pay for road freight if the vehicle ships with Kiwi Car Carriers (they only deliver to Brisbane).

Add all that up. Now you have a figure which you can compare against R32's you see in the trading post. The difference (if any) will be what you are saving by taking the risk of buying a dunger and the stress/headache of messing about importing the car. If, in your opinion, you'd prefer to save the cash/be the first Australian owner/whatever, go ahead and import the car, you'll prob come out ahead. Keep in mind though, that the cheaper the vehicle (moreso the lower the median sale price of that particular model) the more savings to be had. What I'm saying is, you'll save more by importing a 1999 GTR than you would by importing an 89 S13, as the fixed costs are the same (well not exactly, but reasonably close bar import duty/GST)

The car doesn't need to be imported through a RAWS. A 15yr old car can be imported, and delivered to your house for your to muck around on, like a few blokes here are doing. If I remember rightly, a SEVS car must go to the workshop for 'real' compliance. They are two totally different things that people tend to use the same term for, which is why you feel confused.

Hope it helps.

Mark

Hmmm thanks for the help mate. I worked out the costs for a few of the r32 gts-t's.. and it seems to save 4 - 5 grand considering the mods on them.. BUT! What happens if the car gets here n the engine is on it's way out? Or a huge mechanical problem as such? There isn't some sort of insurance u can get ay? I don't think i wanna take the risk of something like this happening without the insurance.. lol

no insurance.. the insurance is paying more to buy it locally..

the jap mechanical inspections aren't meant to be much chop most of the time.

my car cost $7k to my door.. another $2k onroad.. I could sell it for $12k tomorrow..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
    • I _think_ that one has a christmas tree or some other retainer spike into a hole in that panel under it. Come in under it with thin scredrivers and just pry it gently up. If you rip the ears off the retainer pin....so what? Just stick it back down after with a bit of race tape and carry on with life.
×
×
  • Create New...