Jump to content
SAU Community

Recommended Posts

my mate just bought a 96 gts (rb25de), i told him he's an idiot coz cud have gotten a gtst for an extra grand but he says he wants a full house gtr engine lol, so what are the specs of this engine? i know it makes around 130 - 147 kw

anyone know the stock 60ft and 1/4 mile times??

He shud race my gtst makes around 210rwkw which is ok considering havent spent more than 5 grand on the car.

So yeah how does it compare in the 60ft and 1/4 mile times? Anyone have some actual figures?

Link to comment
https://www.sau.com.au/forums/topic/62956-rb25de-specs/
Share on other sites

ok mate, firstly a gtst makes about 184KW stock :P

stats on the RB25DE:

RB25DE  

Bore & Stroke  

Capacity  

Power  

Compression  

Twin cam  

86 X 71.7  

2498  

190ps @5600  

23.5kg's @4800  

10 to 1  

   

The RB25DE is the middlebrother of the nissan RB series Its a Twin cam 2.5 liter.  

This engine is very torquey and is great if you don't require turbo performance.  

It features in the R23 R33 R34 series of Skylines both 4 door and 2 door and came in manual or automatic.  

also is came in the R33 & R34 gts-4 so that the gtr had no competion.  

don't quote me on 1/4 mile times, but I think it's about a second slower over the distance than a gtsts (both stock)

The RB25DE has some go - nice form a running start about 50k's and dropping back a gear...but it's never going to beat a 'worked' gtst - without spending money on it....allot of money :P

Some easy shit he can do:

Work on intake - high flow filter/POD filter

2.5" Exhaust (cat back or full system - just no larger then 2.5")

Extracters (check link in my sig for some cheap!)

NOS (he can get a nice wet kit for <900 bucks and run a 50HP shot)

Simply stuff ^^^

Then ofcourse he could spend 3500 bucks, buy a frontcut 33 and do a conversion - but if it's his first car - the relative savings on fuel/services/insurance/running costs will be great - they look nice and go ok - i'v beaten every homo VL driver whom tries to go 'fully sick' on the freeway - lol - also the older silvia's/180's have no chance....

Link to comment
https://www.sau.com.au/forums/topic/62956-rb25de-specs/#findComment-1185498
Share on other sites

your mate is not an idiot for buying an NA, and I would like to think that he knows what

he is doing.

Everyone always says forced induction is the way to go, of course for an extra grand or two

you definately get bang for buck... so why not.

I paid as much for my GTS as the cost of a GTST, for a COMPLETELY stock, clean, first owner,

etc car.

It comes down to your needs, and driving lifestyle. If your not racing, then why do you need

turbo? For a street driven car, for daily use - I find NA is the go.

Your mate might have his own reasons for buying an NA. Whether it be insurance, or

fuel consumption, whatever...

That said... gatty has pretty much summed up what can be done to NA engines.

I think the factory quoted figure is 147kw@4400RPM, I have recently put my car

on the dyno for a base figure, stock except for pod filter... I managed 108rwkw

Link to comment
https://www.sau.com.au/forums/topic/62956-rb25de-specs/#findComment-1185575
Share on other sites

Stock times are a bit hard to answer as alot depends on the driver and the strip in question specially when it comes to 60ft times. There are so many variables that come into play, I've seen a stock auto sedan 96 GTS25 do 16.8 and a stock 94 GTS25 coupe do 15.8 so if you say somewhere in the middle you should be about right. With a good driver you should get around 2.3 sec 60ft.

Hope thats of some help

Link to comment
https://www.sau.com.au/forums/topic/62956-rb25de-specs/#findComment-1185666
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...