Jump to content
SAU Community

Recommended Posts

The FW27 will accelerate from standing to 200kmh in five seconds, and deceleration forces on board will reach 5g. 1g equates to driving into a brick wall at 30kmh. Brake temperatures to generate the deceleration will reach 6000C in one second

On board the FW27, exhaust temperatures reach 9500C and even the air temperature in the pneumatic valve system reaches temperatures two and half times boiling point at 2500C

The BMW P84/5 contains 5,000 individual components, and takes 100 man hours to build. BMW have historically produced approximately 200 engines per season, but this figure will reduce in 2005

BMW produce 1,000 drawings in the design of each engine

The BMW engine weighs less than 90 kilograms

At 19,000 rpm, 316.7 revolutions and 1,583.3 ignitions take place each second in the BMW F1 engine. 9,500 engine speed measurements are made, the pistons cover a distance of 25 metres, and 550 litres of air are drawn in

In the P84, maximum piston acceleration was 10,000g. Peak piston speed was 40 metres per second

1.3 terabytes of aero data processed in CFD (1 terabyte is a thousand million bytes, equivalent to 69,333 volumes of the Encyclopaedia Britannica

250,000 man hours of design time has been spent on the FW27, with a further

250,000 man hours required in fabrication and build 4,500 drawings have been produced in the design of the FW27 chassis. End-on-end, these drawings would stretch for 5,350km with a further 4,000 expected to be

produced to support the FW27's lifecycle. By the end of the season, drawings would reach from London to Buenos Aires

Link to comment
https://www.sau.com.au/forums/topic/63181-facts-and-figures-williams-bmw-fw27/
Share on other sites

even the air temperature in the pneumatic valve system reaches temperatures two and half times boiling point at 2500C
Well i'd assume boiling point is 100c meaning its 25x boiling point .... or did I do "Science for life" for a reason?

"The FW27 will accelerate from standing to 200kmh in five seconds, and deceleration forces on board will reach 5g. 1g equates to driving into a brick wall at 30kmh. Brake temperatures to generate the deceleration will reach 6000C in one second "

thats wat i heard on channel 10 news today

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...