Jump to content
SAU Community

Recommended Posts

Ok, I doubt anybody is going to answer this one, but I'll give it a shot..

My newish HR31 Passage, fine in most other respects, has got some major ass problems.

Basically there is a very loud clunking from LHS rear wheel. The problem appears more pronounced when you get one back wheel off the ground during a 90deg turn (into a driveway, etc), makes a huge "clunk" and goes into spastic mode. I'll drive along after that, and the whole rear of the car will shudder, feels like the wheel is goinng to fall off (maybe it is.. ).

Other times, it seems to sort itself out and go back to normal, but the rear goes into "minor spastic" mode over a bump, and clunks again for a tiny bit.

The HICAS light will flash on during this, and might stay on once it goes spacco for a bit.

Now... my suspects are either hosed diff (needs major shim? causing the axel to pop out nearly?).. although if it is the diff, then it does seem to turn ok for the most part, and LSD when on full boot when everything is working just like normal? I do have another R200 diff sitting around which I'll try eventually.

The other is the HICAS itself is ****ed, going into a spastic and turning the rear wheels when you're trying to go straight.

So is it more likely to be HICAS or diff related, or something else altogether?

oh - and what does the little house looking thingo on the dash mean?? Mine is always on.

Link to comment
https://www.sau.com.au/forums/topic/64310-hr31-weirdness/
Share on other sites

The rear has been replaced with standard munroe shocks..

fronts are shagged, but it's rear end prob.. I do have a set of S13 king springs and shocks to try in the rear.. Sounds more major than just suspension itself, but I might fit them just in case.

Link to comment
https://www.sau.com.au/forums/topic/64310-hr31-weirdness/#findComment-1205533
Share on other sites

Thanks for the suggestions..

Today I crawled under there to take a look. Everything appers to be in order, and checked the tension of a few bolts, the rear swaybar, bushes, etc. I think I even worked out out the HICAS on that thing works (two pistons - weird setup).

Took off the suspected wheel, removed the caliper, and took off the hub. Again nothing too obvious there, so put all back together.

Just before I took it for a spin, and the problem was still there. When I stopped though, I felt that wheel, and noticed it was very very hot even after just a quick drive. I think what could be happening is that the handbrake appears to be getting "stuck" on for that wheel

The car has an older setup with the drum type arrangement for the handbrake sitting inside the hub. I did spray a whole heap of lubricant in there, and over the tension springs, etc but that didn't seem to make any difference.

I don't really have too much of an idea how that handbrake setup works with the drum (usually its just a spring to the caliper) - would should I look at? What usually do you replace in there? What type of problems can develop?

Link to comment
https://www.sau.com.au/forums/topic/64310-hr31-weirdness/#findComment-1206522
Share on other sites

I didn't notice the heat b4 tightening the handbrake.. but unfortunately I didn't check eitehr. It's possible it was deliberate loosened to prevent the probelm.

The wumping and strangely from that wheel was still the same though.

Link to comment
https://www.sau.com.au/forums/topic/64310-hr31-weirdness/#findComment-1208567
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...