Jump to content
SAU Community

Recommended Posts

yes this turbo will fit an r32 i had one on my old car, it pulled alot harder higher up in the rev range than the stock r32 turbo did. ive seen ppl with these turbo making figures around the 180rwkw mark (with other mods of course)

hmm

not wanting to rain on your sale ... but that turbo has 45 v1 printed on the side ...

this is an early r33 turbo, prolly series 1, the turbo that was on my series 2 was a 45 v4, and i believe is the latest version of turbos they fitted to the r33's .. someone correct me there ...

would be worth researching what version of turbo the r34 is supposed to have imho ..

just my 2c, and waiting to be stood corrected ...

so is this a 33 or 34 turbo? i'm confused...... :confused:

i THOUGHT it was from an r33, as the 45 v1 pertains to the version number, version 1, the turbo that came off my series 2 r33 was a version 4, and i now have a high flow from GCG on there that is a version 3 ... i was told that the lower the V number the older the turbo ...

but if people with r34's can confirm that the 45v1 is from an r34 as well ... then who knows ... just down to what the seller says it is ... of which i have NO basis to think hes not telling the truth ....

just my 2c

Flaps - those results are excellent from a newer stockie

So is there much diff b/w 33 and 34 turbos? anybody know.

Sorry to ask so many questions.

BTW - alarmguy - any budgeo n the price? Its a little out of my bracket.

Cheers

I have fitted two R34 turbos- one was into a R33 when the old turbo died

The second was into a R32, they are a direct fit.

I'll make an offer of $500 as I need another one for an R32. Excuse my rudeness but I think $800 is way too high even if its got 24km. This amount of km means the turbo is well and truly run in and is by no means even close to new

As to the question of whether they are different the answer is not really. They look exactly like an R33 turbo and pretty much perform identically.

I had my R33 dynoed before and after one was fitted with no power difference.

hey alarm guy, can we meet up sometime soon? I'd like to have a look at it and if its all good, i'lll put a price down.

buzz me on 0422-252-683

Ask for Tony - cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...