Jump to content
SAU Community

Recommended Posts

You skyline drivers are so narrow minded.

HSVs are not slow.

you have to compait cars stock.

A stock R33 GTS-t runs

($25000)

0-100 in 6.95 seconds

0 - 160 in 15 seconds

400 m in 14.5 @ 157kph (High performance imports mag)

A stock 297kw LS2 clubsport runs

($67000)

0-100 in 4.99 sec

0 - 160kph in 11.85 seconds

400m in 13.01 seconds @ 178kph (motor magazine

(have seen slower times but these were motors quickest) )

R33 GTR stock

($100,000 new)

0-100 in 5 flat

0 - 160 in 12 seconds

400m in 13.3 seconds @167kph (High performance imports mag)

Now im a true HSV/Holden fan. But ill give credit to a good car.

The GTR is a good car. It will beat a HSV from standstill. But... stock. A LS2 HSV is

quicker than a Stock R34 GTR from a roll.... or after 60 kph

Stock R34 GTR 100 - 200kph in 11.5 seconds (British motormag)

VT GTS 300kw(brit version GEN III) in 10.0 seconds

compair.JPG

Here is a link to a acceleration graph (GTR vs HSV vs GTS-t)

http://www.geocities.com/firebladejay/compair.JPG

You can see how the GTR launchs ahead, but gets realed in by the Clubby

Below. You can see GTRs 4WD advantage from 0 - 60kph

R33 GTR 0 - 60kph = 2.5 seconds (British car mag)

Clubsport R8 0 - 60 = 2.7 seconds (Motor)

But when tracktion is no longer an issue you can see the rolling performance of the clubsport

R33 GTR 60 - 100kph = 2.5 seconds (British car mag)

Clubsport R8 60 - 100kph = 2.3 seconds (Motor)

And more so up top

GTR 100 - 160 = 8 seconds (Brit car mag)

Clubsport 100 - 160 = 6.75 seconds (motor)

LS2 will obviously be alot quicker due to better top end breathing and high torque.

Now lets compair the The stock 297kw Clubsport with a stock GTS-t

A stock R33 GTS-t runs

0-100 in 6.95 seconds

0 - 160 in 14.2 seconds

400 m in 14.5 @ 157kph

A stock 297kw LS2 clubsport runs

0-100 in 4.99 sec

0 - 160kph in 11.85 seconds

400m in 13.01 seconds

A stock 297kw LS2 clubsport runs (On a bad day)

0-100 in 5.5 sec

0 - 160kph in 12.2 seconds

400m in 13.55 seconds

Now which car looks slow?

You cannot compair a stock car with a modified car.

Lets compair 2 equally, lightly modded GTS-t and HSV

225Rwkw GTS-T (60rwkw more than standard)

400m in 12.98 @ 107mph

287Rwkw LS2 Clubsport (60rwkw more than standard)

12.48 @ 113.7 mph

It apears that an equally worked Clubsport is still faster than the GTS-t with high MPH, which means top end wise.... the clubsport is pulling away from the GTS-t

My point is... stock bagging out HSVs saying there slow... cause obviously there not.

Yes there are 300rwkw GTS-ts..... but u cant compair it to a stock Clubsport... and then say its slow. Cause a stock Clubby will chew a stock Skyline.

Link to comment
https://www.sau.com.au/forums/topic/64819-stop-baggin-hsvs/
Share on other sites

  • Replies 350
  • Created
  • Last Reply

Top Posters In This Topic

have a look in the other thread where you posted the same thing basically.

Not all people on here think hsv's are slow ok. Many think they are good but like skylines better. So, dont go out and generalise that we are ALL narrow minded, because if you think that then it is you sir who are narrow minded...

Link to comment
https://www.sau.com.au/forums/topic/64819-stop-baggin-hsvs/#findComment-1212815
Share on other sites

I dont think anyony would say a HSV is slow, obviously they are not. But I think the skylines are infinatly better designed cars.

As a mechanical engineer it is hard to admit that the Jap's design better cars than the Australians, I don't think it has anything to do with skill of indervidual engineers (Australians are renound for their engineering invention) but it has more to do with the market. Australians, as a market, aren't to interested in elegance in engineering design, most people are more interested in having a bloody big donk up front (5.7 L V8).

I have owned both skylines and Holdens (VL and VP), I can tell you, the skyline is an infinatly better car than both the commodores put together. I'd be happy to walk around and compare the stone age design concepts in the commodores compared with the well thought out, designed and constructed skyline. The biggest one that comes to mind is the suspension setup on both cars, its like comparing chalk and cheese.

Just compare a race prep skyline (group A) with a race prep commorore (V8 supercar), there is NOTHING origional in a V8 supercar, everything from the suspension to chassis are redesigned. Eg; most V8 teams use A arm suspension which is a major design change from the standard struts. A GTR skyline, on the other hand, basically things are just strengthened, there is no major design changes (eg; they come stock with full A arm suspension).

And think about this:

Skylines are sports cars, Commodores / HSV are basically family cars.

If you had any Fu*kin idea what you were talking about you would realise that skylines are the better car.

Link to comment
https://www.sau.com.au/forums/topic/64819-stop-baggin-hsvs/#findComment-1212829
Share on other sites

Your comparison is interesting, but you have missed one major point. You listed new prices for all cars, but an R33 can't be bought new. The reason for this is that YOU ARE COMPARING A BRAND NEW SPECIALIST-MADE (HSV not Holden) CAR TO AN 8-12 YEAR OLD ONE MADE BY A MAINSTREAM MANUFACTURER. You pillock. I am sure someone on this forum could provide you with some interesting performance figures for SPECIALIST Jap tuning house Skyline derivatives (Mines, Nismo etc) which would make your BRAND NEW HSV look rather second rate. No need though: buy a stock R33 GTR for $50k, spend the remaining $17k on engine-only mods and then compare 1/4 times.

When you are finished doing that, put the GTR with its relatively mild engine mods and STOCK suspension on a race track (with corners, you know corners? Where you have to change direction in that 1700kg behemoth?) with that VU you've wasted your money on and see what happens. Remembering all the time that you are losing to a car about 10 years older, which is far more driveable day to day and probably uses less fuel AND doesn't make as much noise.

Fool.

Link to comment
https://www.sau.com.au/forums/topic/64819-stop-baggin-hsvs/#findComment-1212834
Share on other sites

Holden's are fast, blah blah blah blah.

Pitty about their general build quality, and the attitude that every single Holden salesperson I and a mate have come across has had, ie. "I'm not here to sell you the car, you're here to buy it...so I'm not going to go out of my way to show you anything"......

Walk into a Ford dealership and get ready to be given gold class treatment in comparison.........

Link to comment
https://www.sau.com.au/forums/topic/64819-stop-baggin-hsvs/#findComment-1212836
Share on other sites

I love these threads, they are always good for a laugh:) Sooner or later ppl will start talking about GTRs were banned because the V8s were too slow (WRONG!!), blah, blah blah:(

I like anything with a bit of funk and performance, and i happen to have a Motor magazine that compares the R33 GTR with the VS HSV GTS-R, and on the twisty stuff the GTS-R left the GTR for dead:) It handled well enough, and puts its 225kw to the ground well enough that the as heavy GTR was caught off boost on slow corner exits etc etc. Given a bit of straight or a few hard stops though and the GTR was on top, it was also quicker from standign starts...but hey that would be putting forward the other side of the argument.

I own a Skyline, and i love Skylines...but LOL, i have seen a VK Brock Grp A own everything at Eastern Creek, including a black Nur R34 GTR so whatever:)

But then again i have a vid with Richard Burns driving Ferraris, Porsches, Lotus etc etc and the R33 GTR was the quickest car around a UK circuit....

Give me a VK Grp III, or a Brock VL Grp A, Motec Injection, Harrop crank and brakes...thrown together by Ian Tate, give it some nice 17" Simmons, Bilstein coil overs and watch some home grown muscle blow away just about everything at the local circuit:) Then again give me the saem money and i could build a GTR:)

I love rambling...ramble...ramble...blah, blah, blah:)

Link to comment
https://www.sau.com.au/forums/topic/64819-stop-baggin-hsvs/#findComment-1212841
Share on other sites

1.) Chickys love the V8s mate. The 16 yr old teeni girls love the skylines.

The older women are the ones who want the V8s... cause the guys that drive them are men.

2.)ive never lost to a skyline, or GTR for that matter (have raced a silver R34 from perth, and a 430HP R32)

3.)My car doesnt look like a rice burner, and it has a lovely sound, and has power/torque anywhere in the rev range.. unlike turbos.

4.) my car hasnt cost me that much money.

5.)I like brute power... not whistling whining, pieces of shit.

Tell me..... if japanese technology is so great?

why can they not get 7500HP out of one of there engines.

A 540Ci supercharged keith black V8 makes 7500HP and 5000Nm of torque?

Most powerful jap engine I know of is a 1900HP Lexus V8 (ahah and it had to be a v8)

Link to comment
https://www.sau.com.au/forums/topic/64819-stop-baggin-hsvs/#findComment-1212852
Share on other sites

Just compare a race prep skyline (group A) with a race prep commorore (V8 supercar), there is NOTHING origional in a V8 supercar, everything from the suspension to chassis are redesigned. Eg; most V8 teams use A arm suspension which is a major design change from the standard struts. A GTR skyline, on the other hand, basically things are just strengthened, there is no major design changes (eg; they come stock with full A arm suspension).

 

Hang on compare the VN Grp A or the VL Grp A Walkinshaw to the R32 Grp A Touring Car. The V8 Supercar is a entirely different set of rules.!!! ... Blimey, not another engineer:rolleyes:

AND LOL, the R32 Grp A was beaten by a VL at Bathurst, it didnt come close in the Shell Series, but it beat the GTRs at Bathurst...so if your going to throw stones, be careful.

Link to comment
https://www.sau.com.au/forums/topic/64819-stop-baggin-hsvs/#findComment-1212859
Share on other sites

Dude, you're all over the place with your points. Just make one, and back it up. But really who cares.

You're acting like a guy that's just been told by another guy that his dick is small. Now the other guy doesn't know if the guy's dick is really small or not, nor does he give a crap, he's just saying it to piss him off. Now if the guy that has just been accused of having a small dick actually had a small dick, psychology tells us he's gonna start going on and on and on about how he does NOT have a small dick...

Now mate, you're coming across just like that guy with the small....

Link to comment
https://www.sau.com.au/forums/topic/64819-stop-baggin-hsvs/#findComment-1212868
Share on other sites

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...