Jump to content
SAU Community

Recommended Posts

Hi guys,

Well Ive found a Skyline " About bloody time a few of you are saying"

Its a 1996 GTS-T SII M-Spec Manual 2 door with a few mods and about 85'ooo on the clock

The only thing is this..

1. The front bumper was damaged when the guy drove up his driveway one day.. now he has replaced it however it still needs to be repainted.. "Silver" - Anyone know roughly how much that would cost me? I can post pics if you request

2. Now this is a big one.. The guy has told me "been very honest I have 2 admit" that when the car gets upto 80kmph on the road it gets a shocking vibration go threw it.. He also said that it happens at about 60kmph if he is going up a hill.

Now to the best of my knowledge and from what he has said it hasnt been in a car accident at all. " could have overseas who knows"

He said he got quoted at about $200 ish to fix it.. and that it could be as simple as getting the tires re balanced.. " Would that affect it if it was going up a hill?" hmm..

Anyway I really want this car becuase the price is great and im going crazy wishing I had one..

You guys have always been a wealth of knowledge and now I need some help..

PS: Whats the cheapest Car inspection around perth .. Onsite. RAC told me $265 !!! because im a non member and $235 if I was.. thats a fair bit.. SGIO dont do it anymore aswell.

Cheers!!

- ADAM

Link to comment
https://www.sau.com.au/forums/topic/64824-need-some-advice/
Share on other sites

OK, vibrations in steering wheel could be many things:

1) Tyres balanced and wheel alignment may fix it

2) the rack end or tie rod end may need replacing, thats what is causing it in my old Aus spec Skyline.

Paint - depends who you know, anywhere from $200 to $400ish and yes, the price can double. Panel and paint prises differ greatly so shop around!

Link to comment
https://www.sau.com.au/forums/topic/64824-need-some-advice/#findComment-1212913
Share on other sites

Hums....

So Im looking at a possible $400 max for painting..

" rack end or tie rod end may need replacing " anyone got any ideas on how much this would set me back??

* Im going 2 ask the guy to know the price down for these things..

Link to comment
https://www.sau.com.au/forums/topic/64824-need-some-advice/#findComment-1212948
Share on other sites

Vibrations can be caused by many different factors, most of the time being unbalanced wheels but vibrations can be caused by things such as an unbalanced tailshaft, gearbox problems and diff problems (it would vibrate heavily at all speeds so i doubt it would be that one). You can hope that its just tyres but it could be many things as well. Also do you know if the vibration only occured while accelerating or under all driving conditions?

Link to comment
https://www.sau.com.au/forums/topic/64824-need-some-advice/#findComment-1213233
Share on other sites

if its got mag wheels id definetly look at the alignment balance thing , my cheap mags have a bit of vibration no problems with the stock ones , ill have to look into the alligners thing . The vibration will be at different speeds depending on the geometry of the car , up a hill , coming off an onramp etc . but mine isnt to bad and "shocking" makes me a bit weary . take it to a tyre/suspension place , get them to balance/align the wheels and see what its like after .

$250-400 for the front bar .

rac are totally useless , you might as well set the cash on fire . Take it a reputable workshop that knows skylines it wont be much more and they know what they are doing . theres a huge thread right here in workshops so take your pick from there .

Link to comment
https://www.sau.com.au/forums/topic/64824-need-some-advice/#findComment-1213485
Share on other sites

* UPDATE

I went for a drive in the car yesterday and the vibration isnt as bad as I expected.. infact it is drivable " Geshh its quick.... only slight mods aswell!! .. more on that later"

The car drives like normal from 0 - 80km but after that it has a vibration go threw the entire car, its not a huge vibration but you can feel it. I dont think its the wheels.. Ive got a feeling its the UV joints.. well regardless I have booked it in for a full check over next friday with Ken at Hyperdrive. $180 is great value for someone who is experienced in Jap cars. Thanx go out to all you people who made me change my mind from a dodge RAC check.

The next thing on the list is this:

Its a 1996 GTST SII M-SPEC and have a look at the replacement front bumper he has put on it!! He put it on after the last one got damaged on his driveway.. Looks like a series one I thought..

Link to comment
https://www.sau.com.au/forums/topic/64824-need-some-advice/#findComment-1217822
Share on other sites

well its certainly NOT a series 2.

At most it could be a Series 1.5.  Looks like a Series 1 to me though.

What does the interior look like?

The bonnet/grill/headlights are all Series 1 (or 1.5) spec.

agreed get the VIN number and get someone to plug it into FAST to find out the build date., but unless he changed the bonnet/grill/headlights its definatly not a 96.

Link to comment
https://www.sau.com.au/forums/topic/64824-need-some-advice/#findComment-1217843
Share on other sites

Did they still make SI in 1996?

Its go something writen under the bonet aswell about SRS airbag, the dash looked like SII but im not 100% sure, those photos arent the best sorry.

Ken at Hyperdrive should be able to tell as soon as he looks at it next week I hope.

Link to comment
https://www.sau.com.au/forums/topic/64824-need-some-advice/#findComment-1217864
Share on other sites

http://forums.skylinesdownunder.co.nz/atta...?s=&postid=6822

That'll give you what year it was built.

Also look on the bottom of the drivers side seatbelt, there's a tag that also gives built information.

Link to comment
https://www.sau.com.au/forums/topic/64824-need-some-advice/#findComment-1218289
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...