Jump to content
SAU Community

Azenis RT-615 tyres

maccattack
 Share

Recommended Posts

maccattack Proficient

maccattack

Posted
Posted

Just wondering if anyone had much information on the new Azenis RT-615.

Have seen a couple of articles about the tyre (including pics) and it looks nice and aggressive. Here is a press release on the tyre for SEMA

"Falken Tire Corp. is proud to début the next generation of RT (race tuned) Spec Sport Radials for North America and the world. Derived from a motorsport lineage that begins with Nürburgring’s Nordschleife, the Super Taikyu Endurance Race Series, and world-class circuits around the globe; the World Spec Azenis RT-615 is poised to initiate the battle for Pure Sports domination. “The development of the RT-615 was spawned from the ever growing need for true motorsport level products without the inherent drawbacks of track dedicated R-Compound tires. As the OEM’s continue to focus more on attitudinal tire characteristics such as NVH (noise, vibration, harshness), the availability of unorthodox sports radials has become all but non-existent. Generally speaking, premium sports customers have been forced to choose between watered down versions of flagship summer tires and limited life cycle R-compound rubber. The World Spec Azenis RT-615 signals the rebirth of truly premium Pure Sports products for discriminating sports drivers.” The World Spec Azenis RT-615 incorporates the absolute latest in design philosophy and materials. “Every aspect of this project has focused on a single development objective. To create and launch a new genre of sports radials that have the credentials to attack authentic JDM brands like Yokohama Advan and Bridgestone Potenza. While we know these competitors may ultimately modify their specifications to meet US glass transition point compound standards, we are prepared to go head to head against the best in the world”. Prepare yourself for the World Spec Azenis RT-615. It will redefine the premium sports tire segment by creating an entirely new benchmark for Pure Sports performance. "

From what I have read, this tyre brings the Azenis back to a pure sport / race tyre as opposed to an in-between hybrib, trying to create a trade off between sport tyre and soft, comfy, noiseless road tyre. Apparently it is due for release in Australia in May, but I haven't seen any performance reports.

Anyone heard anything about these tyres??

Link to comment
https://www.sau.com.au/forums/topic/65352-azenis-rt-615-tyres/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...