Jump to content
SAU Community

Recommended Posts

Originally posted by Hicks

Dynos are all messed up. I pulled 240bhp at formaz and 270bhp

at genie. But i think formaz is the good one.

But that doesn't stop me from showin other people the 270 one.

The genie one is a good 'car seller' :P

I ran a guy who just had a fresh 305rwhp chart from the genie dyno and handed him his ass several times at no stage did he ever look like keeping up. In the real world i don't think I've got any more than 200rwhp ( I've not had a dyno for a long time all the same).

Formaz sounds good for just $50 a run.:(

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99215
Share on other sites

Originally posted by macka

Ive heard the Formaz one is a "hard" dyno so should be interesting...

Im booked in at cyphers tomorrow for an AFC tune so they use the formaz one shall be interesting what i may get i think boost will only be limited to Injector duty cycle now :D

Fingers crossed it dont blow hehe

Formaz would be 'hard' compared to the likes of genie and myaree. At least if you have been there before you will be able to get some idea of the HP change.

As far as stock injectors go. If you do the whatisname trick and fit the 044 and a malpassi you will be laughing all the way to 250+rwkw on stock injectors. I wouldn't try it on the smaller bosch pumps tho' they choke up flow at high pressures (even though they flow more than stock at the same pressure).

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99661
Share on other sites

Originally posted by rev210

Formaz would be 'hard' compared to the likes of genie and myaree. At least if you have been there before you will be able to get some idea of the HP change.  

As far as stock injectors go. If you do the whatisname trick and fit the 044 and a malpassi you will be laughing all the way to 250+rwkw on stock injectors. I wouldn't try it on the smaller bosch pumps tho' they choke up flow at high pressures (even though they flow more than stock at the same pressure).

A wet paper bag is harder than Genies and Myarees dyno :D

Maybe a bit harsher than Psis and Barrys altho just a guess

United fuel injection damn u gotta have a good car to get any sort of figures on that bloody thing hehe

Ive done the 910 pump but going to do the Rising reg at a later date.. I just want to make sure my airflow meter and injectors have headroom :D then ill be back to the drags chasing gradenkos tail hehe...oh and yours!

Looks like the pineapples will go in aftrwards too

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99690
Share on other sites

Originally posted by macka

A wet paper bag is harder than Genies and Myarees dyno :D

Maybe a bit harsher than Psis and Barrys altho just a guess

United fuel injection damn u gotta have a good car to get any sort of figures  on that bloody thing hehe

Ive done the 910 pump but going to do the Rising reg at a later date.. I just want to make sure my airflow meter and injectors have headroom :D then ill be back to the drags chasing gradenkos tail hehe...oh and yours!

Looks like the pineapples will go in aftrwards too

Chase MY tail? I think with the pineapples on you will show a clean pair of heals to my slow car.:D

I'm hoping you do get 300+rwhp and start with some 12.5's to show up those GTR boys and girls:D

910's are pretty good as an upgrade. I'd look around for some 550cc injectors as opposed to doing the rising rate if you are going to stick with that pump (lets face it 910's are nice and quiet)

What fuel management are you running macka?

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99707
Share on other sites

Originally posted by rev210

Chase MY tail? I think with the pineapples on you will show a clean pair of heals to my slow car.:D

I'm hoping you do get 300+rwhp and start with some 12.5's to show up those GTR boys and girls:D

910's are pretty good as an upgrade. I'd look around for some 550cc injectors as opposed to doing the rising rate if you are going to stick with that pump (lets face it 910's are nice and quiet)

What fuel management are you running macka?

Cant be too optimistic :D

I got [email protected] psi at psis not long ago so i should easy get 300 but ya never know,..

Im running a top secret ROM which seems to only control ignition and im getting the Safc tuned tomorrow at 16psi dont worry i have a decompressed engine

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99736
Share on other sites

Originally posted by macka

then ill be back to the drags chasing gradenkos tail hehe...oh and yours!

Or more than likley, you'll be showing us your tail. :D In any case, your outta range for the stock turbo award :D

Speaking of fuel pumps, Barrie showed me a Walbro in tank pump yesterday, a bit of a change from Bosch I thought. Seems like a good deal though, flows 195ltr/hr, enough for 500hp for $220 and a higher model available that flows 255 ltr/hr and can handle high pressure.

http://www.autoperformanceengineering.com/...l/fuelpump.html

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99742
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...