Jump to content
SAU Community

Recommended Posts

Originally posted by Hicks

Dynos are all messed up. I pulled 240bhp at formaz and 270bhp

at genie. But i think formaz is the good one.

But that doesn't stop me from showin other people the 270 one.

The genie one is a good 'car seller' :P

I ran a guy who just had a fresh 305rwhp chart from the genie dyno and handed him his ass several times at no stage did he ever look like keeping up. In the real world i don't think I've got any more than 200rwhp ( I've not had a dyno for a long time all the same).

Formaz sounds good for just $50 a run.:(

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99215
Share on other sites

Originally posted by macka

Ive heard the Formaz one is a "hard" dyno so should be interesting...

Im booked in at cyphers tomorrow for an AFC tune so they use the formaz one shall be interesting what i may get i think boost will only be limited to Injector duty cycle now :D

Fingers crossed it dont blow hehe

Formaz would be 'hard' compared to the likes of genie and myaree. At least if you have been there before you will be able to get some idea of the HP change.

As far as stock injectors go. If you do the whatisname trick and fit the 044 and a malpassi you will be laughing all the way to 250+rwkw on stock injectors. I wouldn't try it on the smaller bosch pumps tho' they choke up flow at high pressures (even though they flow more than stock at the same pressure).

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99661
Share on other sites

Originally posted by rev210

Formaz would be 'hard' compared to the likes of genie and myaree. At least if you have been there before you will be able to get some idea of the HP change.  

As far as stock injectors go. If you do the whatisname trick and fit the 044 and a malpassi you will be laughing all the way to 250+rwkw on stock injectors. I wouldn't try it on the smaller bosch pumps tho' they choke up flow at high pressures (even though they flow more than stock at the same pressure).

A wet paper bag is harder than Genies and Myarees dyno :D

Maybe a bit harsher than Psis and Barrys altho just a guess

United fuel injection damn u gotta have a good car to get any sort of figures on that bloody thing hehe

Ive done the 910 pump but going to do the Rising reg at a later date.. I just want to make sure my airflow meter and injectors have headroom :D then ill be back to the drags chasing gradenkos tail hehe...oh and yours!

Looks like the pineapples will go in aftrwards too

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99690
Share on other sites

Originally posted by macka

A wet paper bag is harder than Genies and Myarees dyno :D

Maybe a bit harsher than Psis and Barrys altho just a guess

United fuel injection damn u gotta have a good car to get any sort of figures  on that bloody thing hehe

Ive done the 910 pump but going to do the Rising reg at a later date.. I just want to make sure my airflow meter and injectors have headroom :D then ill be back to the drags chasing gradenkos tail hehe...oh and yours!

Looks like the pineapples will go in aftrwards too

Chase MY tail? I think with the pineapples on you will show a clean pair of heals to my slow car.:D

I'm hoping you do get 300+rwhp and start with some 12.5's to show up those GTR boys and girls:D

910's are pretty good as an upgrade. I'd look around for some 550cc injectors as opposed to doing the rising rate if you are going to stick with that pump (lets face it 910's are nice and quiet)

What fuel management are you running macka?

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99707
Share on other sites

Originally posted by rev210

Chase MY tail? I think with the pineapples on you will show a clean pair of heals to my slow car.:D

I'm hoping you do get 300+rwhp and start with some 12.5's to show up those GTR boys and girls:D

910's are pretty good as an upgrade. I'd look around for some 550cc injectors as opposed to doing the rising rate if you are going to stick with that pump (lets face it 910's are nice and quiet)

What fuel management are you running macka?

Cant be too optimistic :D

I got [email protected] psi at psis not long ago so i should easy get 300 but ya never know,..

Im running a top secret ROM which seems to only control ignition and im getting the Safc tuned tomorrow at 16psi dont worry i have a decompressed engine

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99736
Share on other sites

Originally posted by macka

then ill be back to the drags chasing gradenkos tail hehe...oh and yours!

Or more than likley, you'll be showing us your tail. :D In any case, your outta range for the stock turbo award :D

Speaking of fuel pumps, Barrie showed me a Walbro in tank pump yesterday, a bit of a change from Bosch I thought. Seems like a good deal though, flows 195ltr/hr, enough for 500hp for $220 and a higher model available that flows 255 ltr/hr and can handle high pressure.

http://www.autoperformanceengineering.com/...l/fuelpump.html

Link to comment
https://www.sau.com.au/forums/topic/6583-todays-effort/#findComment-99742
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...