Jump to content
SAU Community

Recommended Posts

Great - I'll checkout the events and see if my car will be registered by then. I'm hoping to register it with someone elses tyres, then take my tyres and take them round the track a few times just to get every little last bit of use - hopefully (and i mean hopefully) see you there :(

Otherwise let us know how they go :)

:P

  • 2 months later...

Looks like I forgot to report back.

First time out with the RE55's I blew my turbo on about lap 6 of Oran Park GP. Was kicking some arse before then though. All over a couple of those 300kw HSV's. These tyres are just a whole new world away from street tyres.

I've since been to Eastern Creek with them one and overtook a few R34 GTR's there. An R34 GTR with more power and AWD was no match for me with RE55's.

If you like driving fast on the track, get some.

Oh I should add, they are bloody noisy on the road. I drove for a couple of weeks with them on the street and they shat me to tears. Also they need smooth surfaces to work nicely. On the street you had to actively steer just to go in a straight line because they track on every little bump and groove in the road.

:werd:

Noisy (to dills like me adds to the appeal of driving a bucket of bolts wannabee race car:))

But in the wet they are quite good as long as you have good tread depth. In my car id say they are the equal of th average road tyre....Still pays to be careful though, in heavy rain i suspect they would be worse and their tendency to tramline makes them a bit of a handful in the wet...well thats my experience anyway....and i use mine as daily driver rubber:(

Depends on the individual...i dont o burnouts or drifve quickly on the street so my day to day kms are very easy on tyres. I suppose the current tyres have done about 6-8 events (some track days in the wet, also drags where they did cop some burnouts) and they have done about 5,000 to 6,000kms...so not all that bad really.

Things is either rotating the tyres or making sure your susp setup is correct otherwise you can kill them pretty quickly , especially on the front

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...