The Dan Posted April 2, 2005 Author Share Posted April 2, 2005 2540 is still one week away. GT30 and 35r's are still two weeks away. Everyone has run out of stock so I am waiting on new arivals. Sorry it has taken me so long to reply, I have been running the shop while the manager is sick and have been back til 8 every night. I know this is no excuse but I'll try to clear up all previous questions in my next post. ok, i'm after a : he needs one this week - any chance? Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1279615 Share on other sites More sharing options...
The Dan Posted April 2, 2005 Author Share Posted April 2, 2005 I am interested in a new turbo. Was thinking about Garrett GT35R what size exhaust wheel can these come in? Also what price would something bigger be GT40 or 42? 0.82 and 1.06 that I know of but there could be some more. On the 0.82 you would get your boost coming in at around 3300-3500. But it punches more air than stock skyline turbos so running 10 psi will feel like 16 on the standard highflow one. A GT40R comes in 0.95 and 1.06. Only good if your engine is putting out more than 400hp by itself. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1279621 Share on other sites More sharing options...
The Dan Posted April 2, 2005 Author Share Posted April 2, 2005 If there are some GT35r's avalaible once you find out let me know and i'll grab one off ya! Cheers Dave Should be mid-late next week or early the following. Hopefully he won't stuff me around but if you say you want one, I'll get it in for you. Just say the word. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1279629 Share on other sites More sharing options...
LBR33 Posted April 2, 2005 Share Posted April 2, 2005 hey did you end up getting the confirmed price on the r33 hiflow Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1279846 Share on other sites More sharing options...
WHITER33GTS-T Posted April 3, 2005 Share Posted April 3, 2005 I currently have a TD06 the car has made 269 rwkw at 14 psi but last time i looked at the turbo is has quite a lot of shaft play, so i am undecieded if i get the old turbo rebuilt or just buy a new one. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1281259 Share on other sites More sharing options...
Skyrine-Dave Posted April 4, 2005 Share Posted April 4, 2005 "The word" Yeah 100% GT35R w/ .82 exh housing. Any chance we can also work out a delivery due to my lack of car at the moment. PM me with how we should go about this transaction Cheers Dave Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1282571 Share on other sites More sharing options...
The Dan Posted April 4, 2005 Author Share Posted April 4, 2005 "The word"Yeah 100% GT35R w/ .82 exh housing. Any chance we can also work out a delivery due to my lack of car at the moment. PM me with how we should go about this transaction Cheers Dave PM sent. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1282634 Share on other sites More sharing options...
WHITER33GTS-T Posted April 6, 2005 Share Posted April 6, 2005 I am also interested in a GT35R with .82 exh housing. How much would freight bo to Tassie? Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1285761 Share on other sites More sharing options...
The Dan Posted April 6, 2005 Author Share Posted April 6, 2005 I am also interested in a GT35R with .82 exh housing.How much would freight bo to Tassie? "Money on the fridge wog" Just kidding...hope you aren't greek or something lol. I don't know how much freight would be to Tassie. You might be able to ask thepost office...I rarely have time to stop in on my busy schedule.. They are still 2 or so weeks away. Garrett have a huge order coming in. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1286368 Share on other sites More sharing options...
Cubes Posted April 6, 2005 Share Posted April 6, 2005 I'm keen to see results before I jump in. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1286596 Share on other sites More sharing options...
TimmyC Posted April 6, 2005 Share Posted April 6, 2005 hey mate, very interested in getting a turbo of you, just need some advice first How much horsepower/kilowatts do you want? =210rwkw What are you using the car for? = Street When do you want boost roughly? = 2200/2500 Do you want power early or late in the rev range = early What Mods you engine has or is going to have including computers or exhaust etc = 3' turbo back, pod+cai, am organising powerfc, FMIC and turbo(this is where you come in) Obviously, what car? = R32 Gtst Intercooled? and is it large, small, medium = will be med Still running AFM or upgraded or no longer there = stock Custom exhaust manifold or standard? (custom exhaust manifolds give you more options) = standard External wastegate or internal(limited to virtually 450hp)? It seems like people are recommending this 2530 for this setup correct ? i know 210rwkw isnt huge, but its all i feel i really need. I was planning on high-flow but it seems like for a bit extra i can give myself much more potential in the future perhaps.. ?? Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1286667 Share on other sites More sharing options...
Cubes Posted April 6, 2005 Share Posted April 6, 2005 TimmyC, Check out the TD06 8cm turbo Roy is running and his results over here. Huge mid range excellent 250rwkw top end potential with what I consider very minimal lag. The TD06 paired up with the 8cm housing is the my new turbo of choice for the rb20det. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1286973 Share on other sites More sharing options...
TimmyC Posted April 7, 2005 Share Posted April 7, 2005 thanks for the heads up cubes, that thread is very helpful to my situation... Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1288579 Share on other sites More sharing options...
The Dan Posted April 8, 2005 Author Share Posted April 8, 2005 and if you decide to go with a TD06, let me know as I should be able to hook you up with one of those too. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1289742 Share on other sites More sharing options...
Syphon Posted April 8, 2005 Share Posted April 8, 2005 Can i get a price on the GT35/40 700hp internally wastegated. (1.06 ex.housing) just want to confirm your GT35 price covers these units thanks Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1290118 Share on other sites More sharing options...
The Dan Posted April 10, 2005 Author Share Posted April 10, 2005 It covers the GT35R but not sure about the 35/40. I'll have to check it out. And they are definately not internally wastegated. You might wanna check that out. I will see but I am 99% sure they are not. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1291579 Share on other sites More sharing options...
Skyrine-Dave Posted April 10, 2005 Share Posted April 10, 2005 Dan, Can i also get a price on a 1.06 exh housing for a GT35R ** as far as i know GT35R's ARE GT35/40 <- thats the old sk00l way of talkin about them sooky syphon wants an internally wastegated exh housing.. ie XR6T turbo... edit: your PM box was full Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1291645 Share on other sites More sharing options...
Syphon Posted April 10, 2005 Share Posted April 10, 2005 Hrmm I know one of them is internally wastegated, maybe its a GT30... Looking for something similiar to this in this thread. http://www.skylinesaustralia.com/forums/sh...ead.php?t=69833 in 0.63 or 0.84 comp. you have pm. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1291697 Share on other sites More sharing options...
stealth Posted April 11, 2005 Share Posted April 11, 2005 Can you please advise your comments on the following as I have just through the process myself of sourcing a turbo and the feed back I've got: GT35/40r ar0.70 and ar1.06 can be sourced with an internal wastegate rated 700hp with ceramic ball bearings RB25 HiFlow with the right internals is capable of 550hp The hiflow is meant to come on boost quicker with a good mid range torque, but the GT would have the legs in the top end. I'm being told the Hiflow has a better durability in case of backfire, better torque range for circuit racing. The Hiflow will cost me $1,750 because of the rated internals ie bigger shaft than the GT, wheels and bearings, however unable to get the specs (all top secret stuff) What is the cost of the GT35/40R? Can you please advise the spec on the hi flow equipment used? - shaft size and brand - Wheel brand - finished AR compressor and turbine - type of bearings - timing (I assume it exchange) Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1293503 Share on other sites More sharing options...
The Dan Posted April 12, 2005 Author Share Posted April 12, 2005 Dan,Can i also get a price on a 1.06 exh housing for a GT35R ** as far as i know GT35R's ARE GT35/40 <- thats the old sk00l way of talkin about them sooky syphon wants an internally wastegated exh housing.. ie XR6T turbo... edit: your PM box was full PM has been emptied...sory for that. Also. The 35R is not the same as the 35/40. The 35R is external gate and rated at 600-650hp. The 35/40 is internal gate and rated at roughly 450hp. You can, however, make a turbo based on the XR6 exhaust combined with a 35R to make it internally gated and still rated at 650hp. But they cannot copy the Ford turbo for obvious reasons....even though they made it. Price on the exhaust housing is about $650-700. in that size. Can't get one for around 3 months though. Link to comment https://www.sau.com.au/forums/topic/66186-turbos-for-all/page/6/#findComment-1296072 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now