Jump to content
SAU Community

Recommended Posts

Hey all,

I know there is a million threads on Greenline. But i have searched with no luck in what i need...

Im about to buy $4795 of head parts for my gtr from Greenline Motorsports...

Im kinda worried how much i will be charged additional when the parts arrive

Greenline have said this:

'' From our experience in Australia, the import system works as follows:

Cost of products + 15% (maximum) import duties + cost of shipping + 10% GST.

Note that for some parts such as engine management, there is 0% duties and 3% for turbos. "

Does anyone know how to calculate all of this ??

Let me know

ASAP i have 5 days : )

thanx in advance

Link to comment
https://www.sau.com.au/forums/topic/66356-greenlinejp-additional-costs/
Share on other sites

'' From our experience in Australia, the import system works as follows:Cost of products + 15% (maximum) import duties + cost of shipping + 10% GST.Note that for some parts such as engine management, there is 0% duties and 3% for turbos. "

Have a look at the customs website. All the info you need is there:

http://www.customs.gov.au/site/page.cfm?u=4368

just get some dodgy recipts made up for a cheaper price and dont pay any duties or gst, some people do it from what i heard

T88,

I certainly wouldn't follow this advice as is "always_me" going to pay the fine or do the time for what is a Federal offence? I would also advise against giving such stupid advice on what is a public forum...

Out.

T88,

I certainly wouldn't follow this advice as is "always_me" going to pay the fine or do the time for what is a Federal offence? I would also advise against giving such stupid advice on what is a public forum...

Out.

im not telling him to do it, as you probably know 90percent of people do it anyways ,so im only stating a fact

im not telling him to do it, as you probably know 90percent of people do it anyways ,so im only stating a fact

I know you are not "Telling" him to do it, but "just get some dodgy recipts...." sounds like advice, which is what I advised against giving. A fair point I think...

Hey all,

I know there is a million threads on Greenline. But i have searched with no luck in what i need...

Im about to buy $4795 of head parts for my gtr from Greenline Motorsports...

Im kinda worried how much i will be charged additional when the parts arrive

Greenline have said this:

'' From our experience in Australia, the import system works as follows:

Cost of products + 15% (maximum) import duties + cost of shipping + 10% GST.

Note that for some parts such as engine management, there is 0% duties and 3% for turbos. "

Does anyone know how to calculate all of this ??

Let me know  

ASAP i have 5 days : )

thanx in advance

Import duty is only 10% now ( from january 1 2005) the rest is correct .

Invoice total +10% duty +10% gst on the total , no duty on computer ( but only if you dont tell them its a car part ) the reduced duty on turbos is only if you tell them they are compressors ( not car parts ) . Don't do the dodgy invoice thing , if you get cought it will cost you heaps more and a criminal record as well .

Always me : 90% of people dont do the dodgy invoice thing , whenever i get something from o/s i pay the tax as i'm sure most people do .

Its all good i figured id take my chances and no matter what i need these parts so i might aswell Pay the TAX involved...

Thanx everyone :(

if customs pick up on what your importing you have no choice.... you pay the tax or you dont get your goods.... its easy as that.

You may be lucky though.... lots of people have had stuff come through without it even being looked at, lots of people have had their stuff checked, i guess it just depends on the day

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just had this happen to me too.  R32 GTR.   Also broke "just before going out onto the track" - someone up there is looking out for us... Very scary since I was about to do a narrow street course with zero run-off and curbs everywhere. Many people on here upgrading to billet uprights and R35 bearings?   Or buying new OEM knuckles?  I am not keen to replace with another s/h 30 year old fatigued part.
    • Top off with distilled water and see what happens. If you keep losing coolant then you know to start looking.
    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
×
×
  • Create New...