Jump to content
SAU Community

Recommended Posts

Well I just went and cleaned it and gave myself a bit of a surprise; it is actually a Trust cooler not the stocker. Obviously replaced in Japan before the car got here. Trust is stamped on the top and bottom.

However since this is much much bigger(and also worth alot more) than the stock 34 cooler I am going to make the price $250 ono and buyer pays postage.

Pictures linked, you can barely make out the Trust stamping due to the flash on the camera but if you look closely it is there.

http://home.iprimus.com.au/nrodwell/IMGP0171_2.JPG

http://home.iprimus.com.au/nrodwell/IMGP0172_2.JPG

I'm interested, but do you have a better pic it, one with the logo? That picture doesn't really do it justice if it is a Trust cooler. Also, what are the measurements..

Cheers.

I am very interested!

Measurements would be good so I know just how much bigger/thicker than my stock GTT one. Happy to pay freight. Not sure if it will bolt straight onto 33 but if it came off your 34 then it will fit mine 100% :)

Thanks

Ok heres some better pictures showing the stamping on the top and bottom. Ignore the dirty garage carpet. :)

Size of the core is 240mm long x 190mm high x 100mm thick.

http://home.iprimus.com.au/nrodwell/trust1.jpg

http://home.iprimus.com.au/nrodwell/trust2.jpg

Unfortunately thats a bit of a "How long is a piece of string?" question.

As it is a much thicker core you should expect some power gain, and less heat soak, however the exact % will vary for each car.

The intercooler is not the limiting factor in how much boost you can run, its the turbo and all the support systems. For reference though, I was running 13psi on it with no issues.

Gtrghostdog,

Yes the cooler would be more than adequate for that setup. You will need the short 90 degree pipe and a silicon reducer and two clamps as well. These are included in the price.

http://home.iprimus.com.au/nrodwell/hoses.jpg

But Razorsharp is in the process of putting a deposit down so if that falls through I'll let you know.

the IC should come with a small bracket that bolts to the rail, the 90 elbow, the rubber/silicon hose (AFAIK it is not a reducer and is rubber) and the various bolts and nuts. the IC bolts straight up to an R33 with a bit of fussing around. ducting the bugger takes a bit time but worth the extra effort.

Hey pushhead, did you have to modify anything or was it a direct fit?

Also, how much is postage to SA?

Can you find out asap, as I am quite keen.

for an R33 GTS-T with M-Spec front bar, I did not have to modify anything at all. Remove stock intercooler and replace it directly with this. I haven't dyno my car to compare it with the stockies but I can tell you it felt like the turbo spool faster. I'm very surprised that no one actually jump in and buy this quickly. For $250 this is too cheap seriously. dont want to spoil anything but errr these cost just abit less than a trust front mount assuming trust front mount are $1500 new these go for $1100 roughly new.

I was next in line if the deal with Razorsharp falls through!

I am very keen to buy this and have the money ready and waiting!!!

Gtrghostdog would be after me technically.

Gtrghostdog,

Yes the cooler would be more than adequate for that setup. You will need the short 90 degree pipe and a silicon reducer and two clamps as well. These are included in the price.

http://home.iprimus.com.au/nrodwell/hoses.jpg

But Razorsharp is in the process of putting a deposit down so if that falls through I'll let you know.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...